CapSee 9000 - Aluminum capsule saw
The CapSee aluminum capsule saw is especially designed as a companion system for the CapSee unit.
This manual saw sections the area precisely and quickly with no deformation, allowing measurements to be easily taken using the CapSee software system.
CapSee capsule saw
| Design | Specifically for Aluminum aerosol capsules! |
| Blades | 100x22x0.6 mm 160 teeth |
| Speed | 600 RPM |
| Power source | 110V or 220V |
| Mechanism | Custom clamping and rotating mechanism |
| Surplus material | Expelled via special drawer on the bottom |
| Design | Specifically for Aluminum aerosol capsules! |
| Blades | 100x22x0.6 mm 160 teeth |
| Speed | 600 RPM |
| Power source | 110V or 220V |
| Mechanism | Custom clamping and rotating mechanism |
| Surplus material | Expelled via special drawer on the bottom |
Description
The CapSee aluminum capsule saw is especially designed as a companion system for the CapSee unit.
This manual saw sections the area precisely and quickly with no deformation, allowing measurements to be easily taken using the CapSee software system.
CapSee capsule saw
Specification
| Design | Specifically for Aluminum aerosol capsules! |
| Blades | 100x22x0.6 mm 160 teeth |
| Speed | 600 RPM |
| Power source | 110V or 220V |
| Mechanism | Custom clamping and rotating mechanism |
| Surplus material | Expelled via special drawer on the bottom |
| Design | Specifically for Aluminum aerosol capsules! |
| Blades | 100x22x0.6 mm 160 teeth |
| Speed | 600 RPM |
| Power source | 110V or 220V |
| Mechanism | Custom clamping and rotating mechanism |
| Surplus material | Expelled via special drawer on the bottom |
