The adaptive seam thickness gauge finally introduced for aerosol cans by adapting automatically to the chuck wall angle. It is highly repeatable as it does not require the operator to excert any force.
Our adaptive seam thickness gauge for beverage cans is no ordinary thickness gauge. It adapts itself automatically to the chuck wall angle and produces more accurate results than any hand held seamometer or caliper.
This leak resistant design has proven so popular that other manufacturers attempted to copy it, but of course the original is still the best.
The seam thickness gauge for food cans is an adaptive gauge that locates the chuck wall angle automatically. It is highly repeatable as it does not require the operator to excert any force.
The gauge's design works so well, it has now been widely copied by other manufacturers. The original design, however, still remains the best in the industry.
ASIS is the world's first fully automatic destructive double seam inspection system. The system does not use harmful, inaccurate or expensive X-ray systems - it uses a robotic arm which empties the can, cuts it, cleans it and performs the measurement with absolutely no human interference!
Already in use in Coca Cola plants around the world for a few years, this system has proven as accurate and durable as it is cost effective!
The Buckle and Burst Gauge for Beverage cans provides an accurate, safe and user-friendly method for testing dome reversal / buckle and burst pressure points for beverage cans and ends!
High accuracy, repeatable gauge for measuring body blank Length, Width and Angle (squareness).
The unit can be used either as standalone, or connected to Symphony SPC data collection software or other software compatible with RS232 data collection.
The BTE-100 - Buckle Tester for Seamed Ends is an automatic, easy to use pressure tester for three-piece seamed cans. The system includes a computer with software that automatically detects the pressure points and displays the can deformation at each stage.
The Cap Inspection system is a high tech unit for detecting no cap, cocked cap, tear in skirt, tear in bridge, vertical crack, no skirt and fill level after the capping machine on the conveyor system.
The CapSee system is a destructive measurement system for aluminum aerosol capsules often used for the treatment of respitory illnesses such as SARS or ASTHMA.
This saw is used to prepare the samples for testing.
The CapSee system is a destructive measurement system for aluminum aerosol capsules often used for the treatment of respitory illnesses such as SARS or ASTHMA.
The system uses optics, laser and mechanics to accurately measure the critical parameters for these aerosol capsules.
Chrome coating measurement using the coulometric method. Also known as STANNOMATIC or CHROMATIC system.
Available in various configurations - either using 1 sq. Inch samples or 4 sq. Inch samples (large) and in one cell, three cell or three cell on rails, as well as automatic or manual.
The Clearance Gauge allows you to set up a seamer easily and quickly while improving the quality of your seams. The system takes the guesswork out of seamer setup, improves the overall quality, reduces the amount and length of seamer stops and catches broken or worn tooling before it becomes a major problem.
The Clearance Gauge allows you to set up a seamer easily and quickly while improving the quality of your seams. The system takes the guesswork out of seamer setup, improves the overall quality, reduces the amount and length of seamer stops and catches broken or worn tooling before it becomes a major problem.
The Clearance Gauge allows you to set up a seamer easily and quickly while improving the quality of your seams. The system takes the guesswork out of seamer setup, improves the overall quality, reduces the amount and length of seamer stops and catches broken or worn tooling before it becomes a major problem.
El Clearance Gauge le permitirá ajustar la maquina cerradora de forma fácil y rápida y así, mejorando la calidad de sus cierres. El sistema elimina las conjeturas durante el ajuste de la cerradora, mejora la calidad en su totalidad y reduce la cantidad y duración de los paros de las maquinas cerradoras y ayuda a encontrar el herramental dañado o desgastado antes de que se conviertan en un mayor problema.
There are a few contour meters or profiloscope solutions on the market. We are proud to have one of the most accurate non-contact laser profilers on the market. This system automatically detects many parameters from every single bead in the profile of the can. The scan takes no more than 8 seconds for the highest can and also includes the can height and flange width measurements as well.
Contact gauges can either scratch, break, or provide a slightly inaccurate measurement due to the shape of the profiling pin. An optical non-contact laser profile is a much higher quality solution.
There are a few contour meters or profiloscope solutions on the market. We are proud to have one of the most accurate non-contact laser profilers on the market. This system automatically detects many parameters from every single bead in the profile of the can. The scan takes no more than 8 seconds for the highest can and also includes the can height and flange width measurements as well.
Contact gauges can either scratch, break, or provide a slightly inaccurate measurement due to the shape of the profiling pin. An optical non-contact laser profile is a much higher quality solution.
Hay algunas soluciones de medidores de contorno o perfiloscopios en el mercado. Nosotros estamos orgullosos de tener uno de los más precisos medidores láser sin contacto en el mercado. Este sistema detecta automáticamente muchos parámetros de cada rizo a lo largo del perfil de la lata. La medición tarda no más de 8 segundos para la lata más alta, también incluye la altura de la lata y además medición del ancho de la pestaña.
Los medidores de contacto pueden ya sea arañar, romper, o proveer de una medida ligeramente imprecisa debido a la forma de la punta de contacto. Un sistema de láser óptico y sin contacto es una solución de mucha mayor calidad.
P&S 21RG is a reliable and accurate rotary inspection system, which automatically inspects damage, flaws, external substances (bottom and sidewall of bottle), and uncleanness in an empty bottle.
A fully automated, multipoint system for inspecting whole surface for empty PET bottles. The system is installed on the line and utilizes multiple cameras to locate defects at high speeds.
The End Profile Analyzer measures external and internal parameters of a sanitary can end (or lid) including end curl specifications. The system utilizes a mixture of mechanical and optical mechanisms to provide the operator with all the critical end measurement information.
El amigable End Profile Analyzer mide todos los parámetros internos y externos de una tapa sanitaria ( o fondo), El sistema utiliza una mezcla de mecanismos mecánicos y ópticos para proveer al operador de todas las mediciones necesarias.
The Front End Gauge is a highly accurate automatic system, designed to measure the can wall thickness at two different points as well as the dome depth and trimmed can height.
This unit utilizes a single wheel architecture to process glass bottles and search for signs of cracks in various locations.
This low cost unit provides several crack detection systems at a high rate (250BPM) and offers quite a few optional measurements to complement this detection.
The inROLL 9000/HR is a non-contact laser profiling system which allows you to scan a profile of a roll, chuck or other toolings. The profile can be exported to AutoCAD, reverse engineered and analyzed (any radius, angle or distance). The system can compare profiles from new and used rolls, determine which model a particular profile belongs to, find duplicate roll designs and even compare the original diagram with the production scan.
El inRoll 9000/HR es un sistema perfilador laser de no-contacto el cual permite escanear el perfil de una carretilla, chuck y otro herramental. El perfil puede ser exportado a AutoCAD. El sistema puede comparer perfiles de carretillas nuevas o usadas, determina a que modelo pertenece el perfil en particular, encuentra diseños duplicados y compara el diagrama original con los escaneos de producción.
The MDA-100 is an automatic Multidimensional gauge for Aerosol cans of all sizes, including seam dimensions and the S-dimension. The gauge can measure all physical dimensions on an Aerosol can less than a second and can replace a number of existing handheld micrometers and calipers.
El medidor Score es un sistema amigable y de bajo costo para la medición el residual y la forma de las estrías.
El sistema utiliza mediciones de campo profundo, junto con tecnología láser PerfectFocusTM para asegurar que si que sus mediciones están en su lugar. El sistema permite medir uno o varios puntos (cada uno con sus propias especificaciones) así como el perfilamiento de las estrías, ¡todo en un mismo sistema!
El sistema también incluye SPC, y utiliza un sistema de colección de datos para permitirle conectarse a medidores adicionales con el mismo software.
Cutting the seam in a lab can be quite a noisy proposition. The noise reducer case allows the use of the seam cutting within the lab and reduces the need for hearing protection devices.
This system is installed inside existing SBO machines, so no additional external system is necessary. Inside SBO model 10, it will measure TSS and bottom. for SBO model 16, it will measure TSS, bottom and sidewall of PET molding inserts.
The POLYsee meaurement system uses optical transmissive, ultraviolet and reflective light to differenciate and measure the different layers within plastic.
Some plastic are too expensive to waste layer thickness on. This unit can save wasted material which can accumulate into hunderds of thousands of dollars per year!
P&S 21RWP is a high speed rotary inspection machine with 4 wheels. The system detects faults including: external substances, reform, and production during the preform production of PET bottles.
The Score Residual Gauge is an affordable and user-friendly system for measuring the residual and shape of easy open scores on any type of easy open end.
NEW! The Score Residual Gauge now features Motorized PerfectFocusTM laser technology. The measurement is motor controlled and fully automatic and you can measure either one point or several points per end (each with its own specification) as well as profile the score groove and measure additional features.
The Seam Stripper for Food Cans can remove the coverhook from any size food can safely, quickly and without distorting the wrinkle, all with just one set of blades. This dramatically reduces the cost and complexity of the machine. There are no extra cutting heads to buy and maintain and it takes just seconds to switch from one can size to another.
By measuring thickness and length at every point around the can - we found that many internal problems are easily found. The system uses laser profiling technology to quickly process an entire can and produce the 360 degree thickness and length graphs.
By analyzing these graphs, problems such as wrinkle, open seams and even false seams can be detected easily.
The system comes in a lab version or a robotic online version.
Midiendo el espesor y la longitud del cierre en cada punto alrededor de la lata, se encuentra que muchos problemas internos son fácilmente localizados. El sistema utiliza tecnología láser de perfilamiento para procesar rápidamente una lata y las gráficas de su espesor y longitud del cierre en 360 grados.
Analizando estas gráficas, problemas como arrugas, cierres abiertos e incluso falso cierre pueden ser detectados fácilmente.
El sistema viene en una versión para laboratorio o en una versión robótica en línea.
By measuring thickness and length at every point around the can - we found that many internal problems are easily found. The system uses laser profiling technology to quickly process an entire can and produce the 360 degree thickness and length graphs.
By analyzing these graphs, problems such as wrinkle, open seams and even false seams can be detected easily.
The system comes in a lab version or a robotic online version.
The SEAMetal system for Large Cans and Pails is a highly accurate, repeatable and safe system for measuring and recording double and triple seam measurements on Paint Cans, Pails, Drums, Oil Filters and other large cans.
SEAMetal es uno de las herramientas de análisis y visualización de cierre más ampliamente usadas en el mundo. Con cientos de clientes alrededor del mundo, el software y hardware se está progresando continuamente.
SEAMetal es el sistema de medición de doble cierre que cualquiera puede aprender y usar fácilmente en su propio leguaje nativo.
SEAMetal is one of the most widely used seam scope and analysis tool in the world. With hundreds of customers world-wide, the software and hardware are continually improving.
SEAMetal is a double seam measurement system that anyone can learn and use easily in their own native language!
The aerosol edition of the SEAMetal software provides special features such as bottom countersink measurement and analysis tools for anyone filling or closing aerosol cans.
The system comes with a free SPC statistical analysis and process control software and is very easy to learn.
SEAMetal HD is the latest version of double seam scopes by Quality By Vision for three piece food cans. This latest version now introduces a High Definition (HDTV) view of the seam.
This provides the highest accuracy and resolution of any seam inspection system ever made by Quality By Vision. This latest edition joins the SEAMetal family of products, already in use by hundreds of companies world wide.
SEAMetal HD's free SPC option is integrated right into the software, it is easy to use and learn. It provides powerful statistical analysis tools and allows operators and administrators alike to view and ensure quality is getting better, not worse...
SEAMetal HD es la versión más reciente de los ámbitos doble costura por la Calidad por la visión. Esta última versión introduce ahora una de alta definición (HDTV) para ver de la costura.
Esto proporciona la mayor precisión y resolución de cualquier sistema de inspección de la costura jamás realizada por la Calidad por la visión. Esta última edición se une a la familia de productos SEAMetal, ya utilizado por cientos de compañías en todo el mundo.
The SEAMetal HD high definition double seam scope for three piece and two piece beverage cans is one of our most popular products. The software is flexible and easy to learn, and includes many features specifically adapted for the beverage markets as well as custom optical units.
The software includes a free SPC software as well as analysis and customization tools (e.g., customizing the reports) that are unique to SEAMetal.
Join the hundreds of customers already using SEAMetal.
SEAMetal SD for beverage is a standard definition (640 x 480) system for examining and evaluating double seams for beverage cans. The software is identical to SEAMetal HD, but contains a less expensive lower resolution optical unit.
The software comes with a free SPC statistical analysis and process control package!
STANNOMetal is the only dedicated system for measuring tin coating weight on ferrum (steel) samples. The system uses the coulometric method (ASTM ref. method B) and utilizes accurate testing and sampling along with new software to accurately detect and analyze how much tin and alloy are on the measured samples.
Available in various configurations - either using 1 sq. Inch samples or 4 sq. Inch samples (large) and in one cell, three cell or three cell on rails, as well as automatic or manual.
Symphony is Quality By Vision's data collection and analysis software. The software can collect data from a variety of equipment, starting with Quality By Vision's own equipment, calipers, gauges, optical equipment and other tools.
The data can be collected automatically, reviewed, reported, and analyzed via the free integrated SPC software. Reports and data can be imported and exported as necessary and the data can also be viewed remotely by a remote administrator or operator.
Various online graphs can be generated, including an overview graph that can show you the live state of manufacturing throughout the company.
Our 3 point beverage saw is high speed carbide saw capable of cutting the beverage can with minimal deformation during the cut and no operator influence on the position of the cut or the cut itself.
Different operators can exert different forces on the cut - which can change measurement data. Quality By Vision's beverage saws use identical force, which after years of research, produce the cleanest and best cuts in the industry!
An automatic saw is no longer just a luxary few companies can afford. In order to accurately measure a can, or rely on SPC statistics, an identical cut must be produced regardless of which operator had made it.
The stainless steel automatic saw not only prevents the operator from influencing the cut, but also ensures that the operator does not deform the seam during the cutting process.
The new Aerosol manual saw was designed to produce the best seam cut for aerosol cans, with minimal deformation, burring or other problems typically associated with other brands.
The saw is both safe to use and operators haver very little influence on the quality of the cut seam - thus improving the overall GR&R rating.
Quality By Vision invested years of research in producing the best beverage saws on the market. The manual beverage saw is a simple solution which uses high speed carbide blades to produce a cut that has minimal deformation and operator influence every single cut!
The general line saw is a unique saw for cutting into general line cans and containers in order to view their seams with the SEAMetal double seam scope.
the portable beverage twin blade saw is a portable saw for use by technicians who prefer not to rely on the local filler's Q/A equipment. The saw is typically bundled with the portable version of our SEAMetal software.
The portable twin blade food can saw provides an easy way for technicians to move from one factory to another without relying on local saws for seam inspection.
The saw is intended to be bundled with a portable version of our best selling SEAMetal system.
The "simple" food saw is a low cost solution for companies requiring a simple and inexpensive solution for cutting the seams for double seam inspection.
Quality By Vision realizes not everyone needs a high end, high cost, saw and has provided this for those customers that need a lower cost solution. This saw is typically bundled with the SEAMetal MSD system.
In order to ensure your Welding will hold, a welding analysis is critical. The Quality By Vision Welding Analyzer is a simple to learn system that measures Nuggets and Extrusions easily and accurately.
Our unique lighting system allows both Nugget and Extrusion to be easily visible and measure them.
Quality By Vision is a global leader in the development and manufacturing of Quality and Process Control systems for the canning industry and its suppliers. Operating out of three facilities and multiple independent sales and service representatives around the world, we've got you covered no matter where you are. See our Distributors page for a listing by country.
The adaptive seam thickness gauge finally introduced for aerosol cans by adapting automatically to the chuck wall angle. It is highly repeatable as it does not require the operator to excert any force.
Our adaptive seam thickness gauge for beverage cans is no ordinary thickness gauge. It adapts itself automatically to the chuck wall angle and produces more accurate results than any hand held seamometer or caliper.
This leak resistant design has proven so popular that other manufacturers attempted to copy it, but of course the original is still the best.
The seam thickness gauge for food cans is an adaptive gauge that locates the chuck wall angle automatically. It is highly repeatable as it does not require the operator to excert any force.
The gauge's design works so well, it has now been widely copied by other manufacturers. The original design, however, still remains the best in the industry.
ASIS is the world's first fully automatic destructive double seam inspection system. The system does not use harmful, inaccurate or expensive X-ray systems - it uses a robotic arm which empties the can, cuts it, cleans it and performs the measurement with absolutely no human interference!
Already in use in Coca Cola plants around the world for a few years, this system has proven as accurate and durable as it is cost effective!
The Buckle and Burst Gauge for Beverage cans provides an accurate, safe and user-friendly method for testing dome reversal / buckle and burst pressure points for beverage cans and ends!
High accuracy, repeatable gauge for measuring body blank Length, Width and Angle (squareness).
The unit can be used either as standalone, or connected to Symphony SPC data collection software or other software compatible with RS232 data collection.
The BTE-100 - Buckle Tester for Seamed Ends is an automatic, easy to use pressure tester for three-piece seamed cans. The system includes a computer with software that automatically detects the pressure points and displays the can deformation at each stage.
The Cap Inspection system is a high tech unit for detecting no cap, cocked cap, tear in skirt, tear in bridge, vertical crack, no skirt and fill level after the capping machine on the conveyor system.
The CapSee system is a destructive measurement system for aluminum aerosol capsules often used for the treatment of respitory illnesses such as SARS or ASTHMA.
This saw is used to prepare the samples for testing.
The CapSee system is a destructive measurement system for aluminum aerosol capsules often used for the treatment of respitory illnesses such as SARS or ASTHMA.
The system uses optics, laser and mechanics to accurately measure the critical parameters for these aerosol capsules.
Chrome coating measurement using the coulometric method. Also known as STANNOMATIC or CHROMATIC system.
Available in various configurations - either using 1 sq. Inch samples or 4 sq. Inch samples (large) and in one cell, three cell or three cell on rails, as well as automatic or manual.
The Clearance Gauge allows you to set up a seamer easily and quickly while improving the quality of your seams. The system takes the guesswork out of seamer setup, improves the overall quality, reduces the amount and length of seamer stops and catches broken or worn tooling before it becomes a major problem.
The Clearance Gauge allows you to set up a seamer easily and quickly while improving the quality of your seams. The system takes the guesswork out of seamer setup, improves the overall quality, reduces the amount and length of seamer stops and catches broken or worn tooling before it becomes a major problem.
The Clearance Gauge allows you to set up a seamer easily and quickly while improving the quality of your seams. The system takes the guesswork out of seamer setup, improves the overall quality, reduces the amount and length of seamer stops and catches broken or worn tooling before it becomes a major problem.
El Clearance Gauge le permitirá ajustar la maquina cerradora de forma fácil y rápida y así, mejorando la calidad de sus cierres. El sistema elimina las conjeturas durante el ajuste de la cerradora, mejora la calidad en su totalidad y reduce la cantidad y duración de los paros de las maquinas cerradoras y ayuda a encontrar el herramental dañado o desgastado antes de que se conviertan en un mayor problema.
There are a few contour meters or profiloscope solutions on the market. We are proud to have one of the most accurate non-contact laser profilers on the market. This system automatically detects many parameters from every single bead in the profile of the can. The scan takes no more than 8 seconds for the highest can and also includes the can height and flange width measurements as well.
Contact gauges can either scratch, break, or provide a slightly inaccurate measurement due to the shape of the profiling pin. An optical non-contact laser profile is a much higher quality solution.
There are a few contour meters or profiloscope solutions on the market. We are proud to have one of the most accurate non-contact laser profilers on the market. This system automatically detects many parameters from every single bead in the profile of the can. The scan takes no more than 8 seconds for the highest can and also includes the can height and flange width measurements as well.
Contact gauges can either scratch, break, or provide a slightly inaccurate measurement due to the shape of the profiling pin. An optical non-contact laser profile is a much higher quality solution.
Hay algunas soluciones de medidores de contorno o perfiloscopios en el mercado. Nosotros estamos orgullosos de tener uno de los más precisos medidores láser sin contacto en el mercado. Este sistema detecta automáticamente muchos parámetros de cada rizo a lo largo del perfil de la lata. La medición tarda no más de 8 segundos para la lata más alta, también incluye la altura de la lata y además medición del ancho de la pestaña.
Los medidores de contacto pueden ya sea arañar, romper, o proveer de una medida ligeramente imprecisa debido a la forma de la punta de contacto. Un sistema de láser óptico y sin contacto es una solución de mucha mayor calidad.
P&S 21RG is a reliable and accurate rotary inspection system, which automatically inspects damage, flaws, external substances (bottom and sidewall of bottle), and uncleanness in an empty bottle.
A fully automated, multipoint system for inspecting whole surface for empty PET bottles. The system is installed on the line and utilizes multiple cameras to locate defects at high speeds.
The End Profile Analyzer measures external and internal parameters of a sanitary can end (or lid) including end curl specifications. The system utilizes a mixture of mechanical and optical mechanisms to provide the operator with all the critical end measurement information.
El amigable End Profile Analyzer mide todos los parámetros internos y externos de una tapa sanitaria ( o fondo), El sistema utiliza una mezcla de mecanismos mecánicos y ópticos para proveer al operador de todas las mediciones necesarias.
The Front End Gauge is a highly accurate automatic system, designed to measure the can wall thickness at two different points as well as the dome depth and trimmed can height.
This unit utilizes a single wheel architecture to process glass bottles and search for signs of cracks in various locations.
This low cost unit provides several crack detection systems at a high rate (250BPM) and offers quite a few optional measurements to complement this detection.
The inROLL 9000/HR is a non-contact laser profiling system which allows you to scan a profile of a roll, chuck or other toolings. The profile can be exported to AutoCAD, reverse engineered and analyzed (any radius, angle or distance). The system can compare profiles from new and used rolls, determine which model a particular profile belongs to, find duplicate roll designs and even compare the original diagram with the production scan.
El inRoll 9000/HR es un sistema perfilador laser de no-contacto el cual permite escanear el perfil de una carretilla, chuck y otro herramental. El perfil puede ser exportado a AutoCAD. El sistema puede comparer perfiles de carretillas nuevas o usadas, determina a que modelo pertenece el perfil en particular, encuentra diseños duplicados y compara el diagrama original con los escaneos de producción.
The MDA-100 is an automatic Multidimensional gauge for Aerosol cans of all sizes, including seam dimensions and the S-dimension. The gauge can measure all physical dimensions on an Aerosol can less than a second and can replace a number of existing handheld micrometers and calipers.
El medidor Score es un sistema amigable y de bajo costo para la medición el residual y la forma de las estrías.
El sistema utiliza mediciones de campo profundo, junto con tecnología láser PerfectFocusTM para asegurar que si que sus mediciones están en su lugar. El sistema permite medir uno o varios puntos (cada uno con sus propias especificaciones) así como el perfilamiento de las estrías, ¡todo en un mismo sistema!
El sistema también incluye SPC, y utiliza un sistema de colección de datos para permitirle conectarse a medidores adicionales con el mismo software.
Cutting the seam in a lab can be quite a noisy proposition. The noise reducer case allows the use of the seam cutting within the lab and reduces the need for hearing protection devices.
This system is installed inside existing SBO machines, so no additional external system is necessary. Inside SBO model 10, it will measure TSS and bottom. for SBO model 16, it will measure TSS, bottom and sidewall of PET molding inserts.
The POLYsee meaurement system uses optical transmissive, ultraviolet and reflective light to differenciate and measure the different layers within plastic.
Some plastic are too expensive to waste layer thickness on. This unit can save wasted material which can accumulate into hunderds of thousands of dollars per year!
P&S 21RWP is a high speed rotary inspection machine with 4 wheels. The system detects faults including: external substances, reform, and production during the preform production of PET bottles.
The Score Residual Gauge is an affordable and user-friendly system for measuring the residual and shape of easy open scores on any type of easy open end.
NEW! The Score Residual Gauge now features Motorized PerfectFocusTM laser technology. The measurement is motor controlled and fully automatic and you can measure either one point or several points per end (each with its own specification) as well as profile the score groove and measure additional features.
The Seam Stripper for Food Cans can remove the coverhook from any size food can safely, quickly and without distorting the wrinkle, all with just one set of blades. This dramatically reduces the cost and complexity of the machine. There are no extra cutting heads to buy and maintain and it takes just seconds to switch from one can size to another.
By measuring thickness and length at every point around the can - we found that many internal problems are easily found. The system uses laser profiling technology to quickly process an entire can and produce the 360 degree thickness and length graphs.
By analyzing these graphs, problems such as wrinkle, open seams and even false seams can be detected easily.
The system comes in a lab version or a robotic online version.
Midiendo el espesor y la longitud del cierre en cada punto alrededor de la lata, se encuentra que muchos problemas internos son fácilmente localizados. El sistema utiliza tecnología láser de perfilamiento para procesar rápidamente una lata y las gráficas de su espesor y longitud del cierre en 360 grados.
Analizando estas gráficas, problemas como arrugas, cierres abiertos e incluso falso cierre pueden ser detectados fácilmente.
El sistema viene en una versión para laboratorio o en una versión robótica en línea.
By measuring thickness and length at every point around the can - we found that many internal problems are easily found. The system uses laser profiling technology to quickly process an entire can and produce the 360 degree thickness and length graphs.
By analyzing these graphs, problems such as wrinkle, open seams and even false seams can be detected easily.
The system comes in a lab version or a robotic online version.
The SEAMetal system for Large Cans and Pails is a highly accurate, repeatable and safe system for measuring and recording double and triple seam measurements on Paint Cans, Pails, Drums, Oil Filters and other large cans.
SEAMetal es uno de las herramientas de análisis y visualización de cierre más ampliamente usadas en el mundo. Con cientos de clientes alrededor del mundo, el software y hardware se está progresando continuamente.
SEAMetal es el sistema de medición de doble cierre que cualquiera puede aprender y usar fácilmente en su propio leguaje nativo.
SEAMetal is one of the most widely used seam scope and analysis tool in the world. With hundreds of customers world-wide, the software and hardware are continually improving.
SEAMetal is a double seam measurement system that anyone can learn and use easily in their own native language!
The aerosol edition of the SEAMetal software provides special features such as bottom countersink measurement and analysis tools for anyone filling or closing aerosol cans.
The system comes with a free SPC statistical analysis and process control software and is very easy to learn.
SEAMetal HD is the latest version of double seam scopes by Quality By Vision for three piece food cans. This latest version now introduces a High Definition (HDTV) view of the seam.
This provides the highest accuracy and resolution of any seam inspection system ever made by Quality By Vision. This latest edition joins the SEAMetal family of products, already in use by hundreds of companies world wide.
SEAMetal HD's free SPC option is integrated right into the software, it is easy to use and learn. It provides powerful statistical analysis tools and allows operators and administrators alike to view and ensure quality is getting better, not worse...
SEAMetal HD es la versión más reciente de los ámbitos doble costura por la Calidad por la visión. Esta última versión introduce ahora una de alta definición (HDTV) para ver de la costura.
Esto proporciona la mayor precisión y resolución de cualquier sistema de inspección de la costura jamás realizada por la Calidad por la visión. Esta última edición se une a la familia de productos SEAMetal, ya utilizado por cientos de compañías en todo el mundo.
The SEAMetal HD high definition double seam scope for three piece and two piece beverage cans is one of our most popular products. The software is flexible and easy to learn, and includes many features specifically adapted for the beverage markets as well as custom optical units.
The software includes a free SPC software as well as analysis and customization tools (e.g., customizing the reports) that are unique to SEAMetal.
Join the hundreds of customers already using SEAMetal.
SEAMetal SD for beverage is a standard definition (640 x 480) system for examining and evaluating double seams for beverage cans. The software is identical to SEAMetal HD, but contains a less expensive lower resolution optical unit.
The software comes with a free SPC statistical analysis and process control package!
STANNOMetal is the only dedicated system for measuring tin coating weight on ferrum (steel) samples. The system uses the coulometric method (ASTM ref. method B) and utilizes accurate testing and sampling along with new software to accurately detect and analyze how much tin and alloy are on the measured samples.
Available in various configurations - either using 1 sq. Inch samples or 4 sq. Inch samples (large) and in one cell, three cell or three cell on rails, as well as automatic or manual.
Symphony is Quality By Vision's data collection and analysis software. The software can collect data from a variety of equipment, starting with Quality By Vision's own equipment, calipers, gauges, optical equipment and other tools.
The data can be collected automatically, reviewed, reported, and analyzed via the free integrated SPC software. Reports and data can be imported and exported as necessary and the data can also be viewed remotely by a remote administrator or operator.
Various online graphs can be generated, including an overview graph that can show you the live state of manufacturing throughout the company.
Our 3 point beverage saw is high speed carbide saw capable of cutting the beverage can with minimal deformation during the cut and no operator influence on the position of the cut or the cut itself.
Different operators can exert different forces on the cut - which can change measurement data. Quality By Vision's beverage saws use identical force, which after years of research, produce the cleanest and best cuts in the industry!
An automatic saw is no longer just a luxary few companies can afford. In order to accurately measure a can, or rely on SPC statistics, an identical cut must be produced regardless of which operator had made it.
The stainless steel automatic saw not only prevents the operator from influencing the cut, but also ensures that the operator does not deform the seam during the cutting process.
The new Aerosol manual saw was designed to produce the best seam cut for aerosol cans, with minimal deformation, burring or other problems typically associated with other brands.
The saw is both safe to use and operators haver very little influence on the quality of the cut seam - thus improving the overall GR&R rating.
Quality By Vision invested years of research in producing the best beverage saws on the market. The manual beverage saw is a simple solution which uses high speed carbide blades to produce a cut that has minimal deformation and operator influence every single cut!
The general line saw is a unique saw for cutting into general line cans and containers in order to view their seams with the SEAMetal double seam scope.
the portable beverage twin blade saw is a portable saw for use by technicians who prefer not to rely on the local filler's Q/A equipment. The saw is typically bundled with the portable version of our SEAMetal software.
The portable twin blade food can saw provides an easy way for technicians to move from one factory to another without relying on local saws for seam inspection.
The saw is intended to be bundled with a portable version of our best selling SEAMetal system.
The "simple" food saw is a low cost solution for companies requiring a simple and inexpensive solution for cutting the seams for double seam inspection.
Quality By Vision realizes not everyone needs a high end, high cost, saw and has provided this for those customers that need a lower cost solution. This saw is typically bundled with the SEAMetal MSD system.
In order to ensure your Welding will hold, a welding analysis is critical. The Quality By Vision Welding Analyzer is a simple to learn system that measures Nuggets and Extrusions easily and accurately.
Our unique lighting system allows both Nugget and Extrusion to be easily visible and measure them.
Quality By Vision is a global leader in the development and manufacturing of Quality and Process Control systems for the canning industry and its suppliers. Operating out of three facilities and multiple independent sales and service representatives around the world, we've got you covered no matter where you are. See our Distributors page for a listing by country.
