Home

Quality Control systems and software for Food cans

Quality control test systems for three piece food cans.

  • Clearance Gauge – ajuste rápido y preciso de cerradora

    El Clearance Gauge le permitirá ajustar la maquina cerradora de forma fácil y rápida y así, mejorando la calidad de sus cierres. El sistema elimina las conjeturas durante el ajuste de la cerradora, mejora la calidad en su totalidad y reduce la cantidad y duración de los paros de las maquinas cerradoras y ayuda a encontrar el herramental dañado o desgastado antes de que se conviertan en un mayor problema.

  • CPA – Analizador de Perfil de lata

    Hay algunas soluciones de medidores de contorno o perfiloscopios en el mercado. Nosotros estamos orgullosos de  tener uno de los más precisos medidores láser sin contacto en el mercado. Este sistema detecta automáticamente muchos parámetros de cada rizo a lo largo del perfil de la lata. La medición tarda no más de 8 segundos para la lata más alta,  también incluye la altura de la lata y además medición del ancho de la pestaña.

    Los medidores de contacto pueden ya sea arañar, romper, o proveer de una medida ligeramente imprecisa debido a la forma de la punta de contacto. Un sistema de láser óptico  y sin contacto es una solución de mucha mayor calidad.

  • EPA - End Profile Analyzer

    El amigable End Profile Analyzer mide todos los parámetros internos y externos de una tapa sanitaria ( o fondo), El sistema utiliza una mezcla de mecanismos mecánicos y ópticos para proveer al operador de todas las mediciones necesarias.

  • inROLL HR – Perfilador de alta resolución para chuck y carretilla

    El inRoll 9000/HR es un sistema perfilador laser de no-contacto el cual permite escanear el perfil de una carretilla, chuck y otro herramental. El perfil puede ser exportado a AutoCAD. El sistema puede comparer perfiles de carretillas nuevas o usadas, determina a que modelo pertenece el perfil en particular, encuentra diseños duplicados y compara el diagrama original con los escaneos de producción.

  • Medidor de Precorte Residual

    El medidor Score es un sistema amigable y de bajo costo para la medición el residual y la forma de las estrías.

    El sistema utiliza mediciones de campo profundo, junto con tecnología láser PerfectFocusTM para asegurar que si que sus mediciones están en su lugar. El sistema permite medir uno o varios puntos (cada uno con sus propias especificaciones) así como el perfilamiento de las estrías, ¡todo en un mismo sistema!

    El sistema también incluye SPC, y utiliza un sistema de colección de datos para permitirle conectarse a medidores adicionales con el mismo software.

  • BTE-100 - Buckle Tester for Seamed Ends

    The BTE-100 - Buckle Tester for Seamed Ends is an automatic, easy to use pressure tester for three-piece seamed cans. The system includes a computer with software that automatically detects the pressure points and displays the can deformation at each stage.

  • Symphony - measurement acquisition and Statistical Process Control

    Symphony is Quality By Vision's data collection and analysis software. The software can collect data from a variety of equipment, starting with Quality By Vision's own equipment, calipers, gauges, optical equipment and other tools.

    The data can be collected automatically, reviewed, reported, and analyzed via the free integrated SPC software. Reports and data can be imported and exported as necessary and the data can also be viewed remotely by a remote administrator or operator.

    Various online graphs can be generated, including an overview graph that can show you the live state of manufacturing throughout the company.

  • Welding Analyzer - ensure your welds are spot on!

    In order to ensure your Welding will hold, a welding analysis is critical. The Quality By Vision Welding Analyzer is a simple to learn system that measures Nuggets and Extrusions easily and accurately.

    Our unique lighting system allows both Nugget and Extrusion to be easily visible and measure them.

  • Body Blank Gauge

    High accuracy, repeatable gauge for measuring body blank Length, Width and Angle (squareness).

    The unit can be used either as standalone, or connected to Symphony SPC data collection software or other software compatible with RS232 data collection.

  • Seam Stripper for Food Cans

    The Seam Stripper for Food Cans can remove the coverhook from any size food can safely, quickly and without distorting the wrinkle, all with just one set of blades. This dramatically reduces the cost and complexity of the machine. There are no extra cutting heads to buy and maintain and it takes just seconds to switch from one can size to another.

  • SEAMetal HD - Visualizador de doble cierre de alta definición

    SEAMetal HD es la versión más reciente de los ámbitos doble costura por la Calidad por la visión. Esta última versión introduce ahora una de alta definición (HDTV) para ver de la costura.

    Esto proporciona la mayor precisión y resolución de cualquier sistema de inspección de la costura jamás realizada por la Calidad por la visión. Esta última edición se une a la familia de productos SEAMetal, ya utilizado por cientos de compañías en todo el mundo.

    • Gauges and attachments for food cans

      Gauges and calipers for quality control for food cans are quite important. Quality By Vision offers high quality gauges of all types, all can be easily integrated automatically into our software.

    • Food saws

      Quality By Vision has a wide range of double seam sectioning saws ("bread saw") for food cans. Accurate cuts are an important part of the seam inspection process - bad cuts can have burrs or deform the seam so that the measurement will simply not be accurate. A proper saw should cause minimal deformation, operator should have the smallest amount of influence on the cut and the cuts should have no burrs or visible scarring!

    • SEAMetal HD - Statistical Process Control (SPC)

      SEAMetal HD's free SPC option is integrated right into the software, it is easy to use and learn. It provides powerful statistical analysis tools and allows operators and administrators alike to view and ensure quality is getting better, not worse...

      And of course, you can't beat the price!

    • 21 CFR 11 compliance

      FDA's 21 CFR 11 is an important guideline today for ensuring data integrity, security and authentication

    • SEAMetal HD Networking capabilities

  • SEAMetal 9000 MSD - semi automatic double seam analyzer - food

    SEAMetal semi-automatic is a low cost solution for customers requiring an accurate seam inspection system.

    This system offers most of the features of the full SEAMetal SD solution, but without the automatic detection module.

    • Food saws

      Quality By Vision has a wide range of double seam sectioning saws ("bread saw") for food cans. Accurate cuts are an important part of the seam inspection process - bad cuts can have burrs or deform the seam so that the measurement will simply not be accurate. A proper saw should cause minimal deformation, operator should have the smallest amount of influence on the cut and the cuts should have no burrs or visible scarring!

    • Gauges and attachments for food cans

      Gauges and calipers for quality control for food cans are quite important. Quality By Vision offers high quality gauges of all types, all can be easily integrated automatically into our software.

    • SEAMetal HD - Statistical Process Control (SPC)

      SEAMetal HD's free SPC option is integrated right into the software, it is easy to use and learn. It provides powerful statistical analysis tools and allows operators and administrators alike to view and ensure quality is getting better, not worse...

      And of course, you can't beat the price!

  • SEAMetal 9000 SD - definición estándar en medición de cierre- alimentos

    SEAMetal es uno de las herramientas de análisis y visualización de cierre más ampliamente usadas en el mundo. Con cientos de clientes alrededor del mundo, el software y hardware se está progresando continuamente.

    SEAMetal es el sistema de medición de doble cierre que cualquiera puede aprender y usar fácilmente en su propio leguaje nativo.

    • Food saws

      Quality By Vision has a wide range of double seam sectioning saws ("bread saw") for food cans. Accurate cuts are an important part of the seam inspection process - bad cuts can have burrs or deform the seam so that the measurement will simply not be accurate. A proper saw should cause minimal deformation, operator should have the smallest amount of influence on the cut and the cuts should have no burrs or visible scarring!

    • Gauges and attachments for food cans

      Gauges and calipers for quality control for food cans are quite important. Quality By Vision offers high quality gauges of all types, all can be easily integrated automatically into our software.

    • SEAMetal HD - Statistical Process Control (SPC)

      SEAMetal HD's free SPC option is integrated right into the software, it is easy to use and learn. It provides powerful statistical analysis tools and allows operators and administrators alike to view and ensure quality is getting better, not worse...

      And of course, you can't beat the price!

    • 21 CFR 11 compliance

      FDA's 21 CFR 11 is an important guideline today for ensuring data integrity, security and authentication

  • Food saws

    Quality By Vision has a wide range of double seam sectioning saws ("bread saw") for food cans. Accurate cuts are an important part of the seam inspection process - bad cuts can have burrs or deform the seam so that the measurement will simply not be accurate. A proper saw should cause minimal deformation, operator should have the smallest amount of influence on the cut and the cuts should have no burrs or visible scarring!

    • TBS-4A Automatic food Twin Blade Saw

      An automatic saw is no longer just a luxary few companies can afford. In order to accurately measure a can, or rely on SPC statistics, an identical cut must be produced regardless of which operator had made it.

      The stainless steel automatic saw not only prevents the operator from influencing the cut, but also ensures that the operator does not deform the seam during the cutting process.

    • TBS-4M Manual food can twin blade saw

      The manual food can stainless steel saw is our classic design and uses a stainless steel design to ensure it remains working for many years.

      This low cost solution is one of our best selling twin blade saw designs.

    • TBS-4PF Portable Twin Blade Saw

      The portable twin blade food can saw provides an easy way for technicians to move from one factory to another without relying on local saws for seam inspection.

      The saw is intended to be bundled with a portable version of our best selling SEAMetal system.

    • TBS-SM - low budget Manual food saw

      The "simple" food saw is a low cost solution for companies requiring a simple and inexpensive solution for cutting the seams for double seam inspection.

      Quality By Vision realizes not everyone needs a high end, high cost, saw and has provided this for those customers that need a lower cost solution. This saw is typically bundled with the SEAMetal MSD system.

  • Gauges and attachments for food cans

    Gauges and calipers for quality control for food cans are quite important. Quality By Vision offers high quality gauges of all types, all can be easily integrated automatically into our software.

Quality Control systems and software for Food cans

Quality control test systems for three piece food cans.

  • Clearance Gauge – ajuste rápido y preciso de cerradora

    El Clearance Gauge le permitirá ajustar la maquina cerradora de forma fácil y rápida y así, mejorando la calidad de sus cierres. El sistema elimina las conjeturas durante el ajuste de la cerradora, mejora la calidad en su totalidad y reduce la cantidad y duración de los paros de las maquinas cerradoras y ayuda a encontrar el herramental dañado o desgastado antes de que se conviertan en un mayor problema.

  • CPA – Analizador de Perfil de lata

    Hay algunas soluciones de medidores de contorno o perfiloscopios en el mercado. Nosotros estamos orgullosos de  tener uno de los más precisos medidores láser sin contacto en el mercado. Este sistema detecta automáticamente muchos parámetros de cada rizo a lo largo del perfil de la lata. La medición tarda no más de 8 segundos para la lata más alta,  también incluye la altura de la lata y además medición del ancho de la pestaña.

    Los medidores de contacto pueden ya sea arañar, romper, o proveer de una medida ligeramente imprecisa debido a la forma de la punta de contacto. Un sistema de láser óptico  y sin contacto es una solución de mucha mayor calidad.

  • EPA - End Profile Analyzer

    El amigable End Profile Analyzer mide todos los parámetros internos y externos de una tapa sanitaria ( o fondo), El sistema utiliza una mezcla de mecanismos mecánicos y ópticos para proveer al operador de todas las mediciones necesarias.

  • inROLL HR – Perfilador de alta resolución para chuck y carretilla

    El inRoll 9000/HR es un sistema perfilador laser de no-contacto el cual permite escanear el perfil de una carretilla, chuck y otro herramental. El perfil puede ser exportado a AutoCAD. El sistema puede comparer perfiles de carretillas nuevas o usadas, determina a que modelo pertenece el perfil en particular, encuentra diseños duplicados y compara el diagrama original con los escaneos de producción.

  • Medidor de Precorte Residual

    El medidor Score es un sistema amigable y de bajo costo para la medición el residual y la forma de las estrías.

    El sistema utiliza mediciones de campo profundo, junto con tecnología láser PerfectFocusTM para asegurar que si que sus mediciones están en su lugar. El sistema permite medir uno o varios puntos (cada uno con sus propias especificaciones) así como el perfilamiento de las estrías, ¡todo en un mismo sistema!

    El sistema también incluye SPC, y utiliza un sistema de colección de datos para permitirle conectarse a medidores adicionales con el mismo software.

  • BTE-100 - Buckle Tester for Seamed Ends

    The BTE-100 - Buckle Tester for Seamed Ends is an automatic, easy to use pressure tester for three-piece seamed cans. The system includes a computer with software that automatically detects the pressure points and displays the can deformation at each stage.

  • Symphony - measurement acquisition and Statistical Process Control

    Symphony is Quality By Vision's data collection and analysis software. The software can collect data from a variety of equipment, starting with Quality By Vision's own equipment, calipers, gauges, optical equipment and other tools.

    The data can be collected automatically, reviewed, reported, and analyzed via the free integrated SPC software. Reports and data can be imported and exported as necessary and the data can also be viewed remotely by a remote administrator or operator.

    Various online graphs can be generated, including an overview graph that can show you the live state of manufacturing throughout the company.

  • Welding Analyzer - ensure your welds are spot on!

    In order to ensure your Welding will hold, a welding analysis is critical. The Quality By Vision Welding Analyzer is a simple to learn system that measures Nuggets and Extrusions easily and accurately.

    Our unique lighting system allows both Nugget and Extrusion to be easily visible and measure them.

  • Body Blank Gauge

    High accuracy, repeatable gauge for measuring body blank Length, Width and Angle (squareness).

    The unit can be used either as standalone, or connected to Symphony SPC data collection software or other software compatible with RS232 data collection.

  • Seam Stripper for Food Cans

    The Seam Stripper for Food Cans can remove the coverhook from any size food can safely, quickly and without distorting the wrinkle, all with just one set of blades. This dramatically reduces the cost and complexity of the machine. There are no extra cutting heads to buy and maintain and it takes just seconds to switch from one can size to another.

  • SEAMetal HD - Visualizador de doble cierre de alta definición

    SEAMetal HD es la versión más reciente de los ámbitos doble costura por la Calidad por la visión. Esta última versión introduce ahora una de alta definición (HDTV) para ver de la costura.

    Esto proporciona la mayor precisión y resolución de cualquier sistema de inspección de la costura jamás realizada por la Calidad por la visión. Esta última edición se une a la familia de productos SEAMetal, ya utilizado por cientos de compañías en todo el mundo.

    • Gauges and attachments for food cans

      Gauges and calipers for quality control for food cans are quite important. Quality By Vision offers high quality gauges of all types, all can be easily integrated automatically into our software.

    • Food saws

      Quality By Vision has a wide range of double seam sectioning saws ("bread saw") for food cans. Accurate cuts are an important part of the seam inspection process - bad cuts can have burrs or deform the seam so that the measurement will simply not be accurate. A proper saw should cause minimal deformation, operator should have the smallest amount of influence on the cut and the cuts should have no burrs or visible scarring!

    • SEAMetal HD - Statistical Process Control (SPC)

      SEAMetal HD's free SPC option is integrated right into the software, it is easy to use and learn. It provides powerful statistical analysis tools and allows operators and administrators alike to view and ensure quality is getting better, not worse...

      And of course, you can't beat the price!

    • 21 CFR 11 compliance

      FDA's 21 CFR 11 is an important guideline today for ensuring data integrity, security and authentication

    • SEAMetal HD Networking capabilities

  • SEAMetal 9000 MSD - semi automatic double seam analyzer - food

    SEAMetal semi-automatic is a low cost solution for customers requiring an accurate seam inspection system.

    This system offers most of the features of the full SEAMetal SD solution, but without the automatic detection module.

    • Food saws

      Quality By Vision has a wide range of double seam sectioning saws ("bread saw") for food cans. Accurate cuts are an important part of the seam inspection process - bad cuts can have burrs or deform the seam so that the measurement will simply not be accurate. A proper saw should cause minimal deformation, operator should have the smallest amount of influence on the cut and the cuts should have no burrs or visible scarring!

    • Gauges and attachments for food cans

      Gauges and calipers for quality control for food cans are quite important. Quality By Vision offers high quality gauges of all types, all can be easily integrated automatically into our software.

    • SEAMetal HD - Statistical Process Control (SPC)

      SEAMetal HD's free SPC option is integrated right into the software, it is easy to use and learn. It provides powerful statistical analysis tools and allows operators and administrators alike to view and ensure quality is getting better, not worse...

      And of course, you can't beat the price!

  • SEAMetal 9000 SD - definición estándar en medición de cierre- alimentos

    SEAMetal es uno de las herramientas de análisis y visualización de cierre más ampliamente usadas en el mundo. Con cientos de clientes alrededor del mundo, el software y hardware se está progresando continuamente.

    SEAMetal es el sistema de medición de doble cierre que cualquiera puede aprender y usar fácilmente en su propio leguaje nativo.

    • Food saws

      Quality By Vision has a wide range of double seam sectioning saws ("bread saw") for food cans. Accurate cuts are an important part of the seam inspection process - bad cuts can have burrs or deform the seam so that the measurement will simply not be accurate. A proper saw should cause minimal deformation, operator should have the smallest amount of influence on the cut and the cuts should have no burrs or visible scarring!

    • Gauges and attachments for food cans

      Gauges and calipers for quality control for food cans are quite important. Quality By Vision offers high quality gauges of all types, all can be easily integrated automatically into our software.

    • SEAMetal HD - Statistical Process Control (SPC)

      SEAMetal HD's free SPC option is integrated right into the software, it is easy to use and learn. It provides powerful statistical analysis tools and allows operators and administrators alike to view and ensure quality is getting better, not worse...

      And of course, you can't beat the price!

    • 21 CFR 11 compliance

      FDA's 21 CFR 11 is an important guideline today for ensuring data integrity, security and authentication

  • Food saws

    Quality By Vision has a wide range of double seam sectioning saws ("bread saw") for food cans. Accurate cuts are an important part of the seam inspection process - bad cuts can have burrs or deform the seam so that the measurement will simply not be accurate. A proper saw should cause minimal deformation, operator should have the smallest amount of influence on the cut and the cuts should have no burrs or visible scarring!

    • TBS-4A Automatic food Twin Blade Saw

      An automatic saw is no longer just a luxary few companies can afford. In order to accurately measure a can, or rely on SPC statistics, an identical cut must be produced regardless of which operator had made it.

      The stainless steel automatic saw not only prevents the operator from influencing the cut, but also ensures that the operator does not deform the seam during the cutting process.

    • TBS-4M Manual food can twin blade saw

      The manual food can stainless steel saw is our classic design and uses a stainless steel design to ensure it remains working for many years.

      This low cost solution is one of our best selling twin blade saw designs.

    • TBS-4PF Portable Twin Blade Saw

      The portable twin blade food can saw provides an easy way for technicians to move from one factory to another without relying on local saws for seam inspection.

      The saw is intended to be bundled with a portable version of our best selling SEAMetal system.

    • TBS-SM - low budget Manual food saw

      The "simple" food saw is a low cost solution for companies requiring a simple and inexpensive solution for cutting the seams for double seam inspection.

      Quality By Vision realizes not everyone needs a high end, high cost, saw and has provided this for those customers that need a lower cost solution. This saw is typically bundled with the SEAMetal MSD system.

  • Gauges and attachments for food cans

    Gauges and calipers for quality control for food cans are quite important. Quality By Vision offers high quality gauges of all types, all can be easily integrated automatically into our software.

All rights reserved, Quality By Vision - information subject to change without prior notice