Home

PRODUCTOS

  • Sistemas de control de calidad para latas de alimentos

    Sistemas de control de calidad para latas de alimentos – empacadores y fabricantes de latas pueden usar estos productos en sus laboratorios de control de calidad.

    • Clearance Gauge – ajuste rápido y preciso de cerradora

      El Clearance Gauge le permitirá ajustar la maquina cerradora de forma fácil y rápida y así, mejorando la calidad de sus cierres. El sistema elimina las conjeturas durante el ajuste de la cerradora, mejora la calidad en su totalidad y reduce la cantidad y duración de los paros de las maquinas cerradoras y ayuda a encontrar el herramental dañado o desgastado antes de que se conviertan en un mayor problema.

    • CPA – Analizador de Perfil de lata

      Hay algunas soluciones de medidores de contorno o perfiloscopios en el mercado. Nosotros estamos orgullosos de  tener uno de los más precisos medidores láser sin contacto en el mercado. Este sistema detecta automáticamente muchos parámetros de cada rizo a lo largo del perfil de la lata. La medición tarda no más de 8 segundos para la lata más alta,  también incluye la altura de la lata y además medición del ancho de la pestaña.

      Los medidores de contacto pueden ya sea arañar, romper, o proveer de una medida ligeramente imprecisa debido a la forma de la punta de contacto. Un sistema de láser óptico  y sin contacto es una solución de mucha mayor calidad.

    • EPA - End Profile Analyzer

      El amigable End Profile Analyzer mide todos los parámetros internos y externos de una tapa sanitaria ( o fondo), El sistema utiliza una mezcla de mecanismos mecánicos y ópticos para proveer al operador de todas las mediciones necesarias.

    • inROLL HR – Perfilador de alta resolución para chuck y carretilla

      El inRoll 9000/HR es un sistema perfilador laser de no-contacto el cual permite escanear el perfil de una carretilla, chuck y otro herramental. El perfil puede ser exportado a AutoCAD. El sistema puede comparer perfiles de carretillas nuevas o usadas, determina a que modelo pertenece el perfil en particular, encuentra diseños duplicados y compara el diagrama original con los escaneos de producción.

    • Medidor de Precorte Residual

      El medidor Score es un sistema amigable y de bajo costo para la medición el residual y la forma de las estrías.

      El sistema utiliza mediciones de campo profundo, junto con tecnología láser PerfectFocusTM para asegurar que si que sus mediciones están en su lugar. El sistema permite medir uno o varios puntos (cada uno con sus propias especificaciones) así como el perfilamiento de las estrías, ¡todo en un mismo sistema!

      El sistema también incluye SPC, y utiliza un sistema de colección de datos para permitirle conectarse a medidores adicionales con el mismo software.

    • BTE-100 - Buckle Tester for Seamed Ends

      The BTE-100 - Buckle Tester for Seamed Ends is an automatic, easy to use pressure tester for three-piece seamed cans. The system includes a computer with software that automatically detects the pressure points and displays the can deformation at each stage.

    • Symphony - measurement acquisition and Statistical Process Control

      Symphony is Quality By Vision's data collection and analysis software. The software can collect data from a variety of equipment, starting with Quality By Vision's own equipment, calipers, gauges, optical equipment and other tools.

      The data can be collected automatically, reviewed, reported, and analyzed via the free integrated SPC software. Reports and data can be imported and exported as necessary and the data can also be viewed remotely by a remote administrator or operator.

      Various online graphs can be generated, including an overview graph that can show you the live state of manufacturing throughout the company.

    • Welding Analyzer - ensure your welds are spot on!

      In order to ensure your Welding will hold, a welding analysis is critical. The Quality By Vision Welding Analyzer is a simple to learn system that measures Nuggets and Extrusions easily and accurately.

      Our unique lighting system allows both Nugget and Extrusion to be easily visible and measure them.

    • Body Blank Gauge

      High accuracy, repeatable gauge for measuring body blank Length, Width and Angle (squareness).

      The unit can be used either as standalone, or connected to Symphony SPC data collection software or other software compatible with RS232 data collection.

    • Seam Stripper for Food Cans

      The Seam Stripper for Food Cans can remove the coverhook from any size food can safely, quickly and without distorting the wrinkle, all with just one set of blades. This dramatically reduces the cost and complexity of the machine. There are no extra cutting heads to buy and maintain and it takes just seconds to switch from one can size to another.

    • SEAMetal 9000 SD - definición estándar en medición de cierre- alimentos

      SEAMetal es uno de las herramientas de análisis y visualización de cierre más ampliamente usadas en el mundo. Con cientos de clientes alrededor del mundo, el software y hardware se está progresando continuamente.

      SEAMetal es el sistema de medición de doble cierre que cualquiera puede aprender y usar fácilmente en su propio leguaje nativo.

      • Food saws

        Quality By Vision has a wide range of double seam sectioning saws ("bread saw") for food cans. Accurate cuts are an important part of the seam inspection process - bad cuts can have burrs or deform the seam so that the measurement will simply not be accurate. A proper saw should cause minimal deformation, operator should have the smallest amount of influence on the cut and the cuts should have no burrs or visible scarring!

      • Gauges and attachments for food cans

        Gauges and calipers for quality control for food cans are quite important. Quality By Vision offers high quality gauges of all types, all can be easily integrated automatically into our software.

      • SEAMetal HD - Statistical Process Control (SPC)

        SEAMetal HD's free SPC option is integrated right into the software, it is easy to use and learn. It provides powerful statistical analysis tools and allows operators and administrators alike to view and ensure quality is getting better, not worse...

        And of course, you can't beat the price!

      • 21 CFR 11 compliance

        FDA's 21 CFR 11 is an important guideline today for ensuring data integrity, security and authentication

    • SEAMetal HD - Visualizador de doble cierre de alta definición

      SEAMetal HD es la versión más reciente de los ámbitos doble costura por la Calidad por la visión. Esta última versión introduce ahora una de alta definición (HDTV) para ver de la costura.

      Esto proporciona la mayor precisión y resolución de cualquier sistema de inspección de la costura jamás realizada por la Calidad por la visión. Esta última edición se une a la familia de productos SEAMetal, ya utilizado por cientos de compañías en todo el mundo.

      • Gauges and attachments for food cans

        Gauges and calipers for quality control for food cans are quite important. Quality By Vision offers high quality gauges of all types, all can be easily integrated automatically into our software.

      • Food saws

        Quality By Vision has a wide range of double seam sectioning saws ("bread saw") for food cans. Accurate cuts are an important part of the seam inspection process - bad cuts can have burrs or deform the seam so that the measurement will simply not be accurate. A proper saw should cause minimal deformation, operator should have the smallest amount of influence on the cut and the cuts should have no burrs or visible scarring!

      • SEAMetal HD - Statistical Process Control (SPC)

        SEAMetal HD's free SPC option is integrated right into the software, it is easy to use and learn. It provides powerful statistical analysis tools and allows operators and administrators alike to view and ensure quality is getting better, not worse...

        And of course, you can't beat the price!

      • 21 CFR 11 compliance

        FDA's 21 CFR 11 is an important guideline today for ensuring data integrity, security and authentication

      • SEAMetal HD Networking capabilities

    • SEAMetal 9000 MSD - semi automatic double seam analyzer - food

      SEAMetal semi-automatic is a low cost solution for customers requiring an accurate seam inspection system.

      This system offers most of the features of the full SEAMetal SD solution, but without the automatic detection module.

      • Food saws

        Quality By Vision has a wide range of double seam sectioning saws ("bread saw") for food cans. Accurate cuts are an important part of the seam inspection process - bad cuts can have burrs or deform the seam so that the measurement will simply not be accurate. A proper saw should cause minimal deformation, operator should have the smallest amount of influence on the cut and the cuts should have no burrs or visible scarring!

      • Gauges and attachments for food cans

        Gauges and calipers for quality control for food cans are quite important. Quality By Vision offers high quality gauges of all types, all can be easily integrated automatically into our software.

      • SEAMetal HD - Statistical Process Control (SPC)

        SEAMetal HD's free SPC option is integrated right into the software, it is easy to use and learn. It provides powerful statistical analysis tools and allows operators and administrators alike to view and ensure quality is getting better, not worse...

        And of course, you can't beat the price!

    • Gauges and attachments for food cans

      Gauges and calipers for quality control for food cans are quite important. Quality By Vision offers high quality gauges of all types, all can be easily integrated automatically into our software.

    • Food saws

      Quality By Vision has a wide range of double seam sectioning saws ("bread saw") for food cans. Accurate cuts are an important part of the seam inspection process - bad cuts can have burrs or deform the seam so that the measurement will simply not be accurate. A proper saw should cause minimal deformation, operator should have the smallest amount of influence on the cut and the cuts should have no burrs or visible scarring!

      • TBS-4A Automatic food Twin Blade Saw

        An automatic saw is no longer just a luxary few companies can afford. In order to accurately measure a can, or rely on SPC statistics, an identical cut must be produced regardless of which operator had made it.

        The stainless steel automatic saw not only prevents the operator from influencing the cut, but also ensures that the operator does not deform the seam during the cutting process.

      • TBS-4M Manual food can twin blade saw

        The manual food can stainless steel saw is our classic design and uses a stainless steel design to ensure it remains working for many years.

        This low cost solution is one of our best selling twin blade saw designs.

      • TBS-4PF Portable Twin Blade Saw

        The portable twin blade food can saw provides an easy way for technicians to move from one factory to another without relying on local saws for seam inspection.

        The saw is intended to be bundled with a portable version of our best selling SEAMetal system.

      • TBS-SM - low budget Manual food saw

        The "simple" food saw is a low cost solution for companies requiring a simple and inexpensive solution for cutting the seams for double seam inspection.

        Quality By Vision realizes not everyone needs a high end, high cost, saw and has provided this for those customers that need a lower cost solution. This saw is typically bundled with the SEAMetal MSD system.

  • Quality Control systems for Beverage cans

    Beverage can Quality Control test systems - double seam inspection, can seam stripper, and more. Beverage can fillers can utilize these systems for the Q/C laboratory.

    • Clearance Gauge – ajuste rápido y preciso de cerradora

      El Clearance Gauge le permitirá ajustar la maquina cerradora de forma fácil y rápida y así, mejorando la calidad de sus cierres. El sistema elimina las conjeturas durante el ajuste de la cerradora, mejora la calidad en su totalidad y reduce la cantidad y duración de los paros de las maquinas cerradoras y ayuda a encontrar el herramental dañado o desgastado antes de que se conviertan en un mayor problema.

      • Cerradoras - Problemas y Soluciones

        Problemas y dificultades comunes con las cerradoras.

        Que problemas potenciales existen, ¿cómo encontrar estas dificultades y cómo se arreglan?

    • Medidor de Precorte Residual

      El medidor Score es un sistema amigable y de bajo costo para la medición el residual y la forma de las estrías.

      El sistema utiliza mediciones de campo profundo, junto con tecnología láser PerfectFocusTM para asegurar que si que sus mediciones están en su lugar. El sistema permite medir uno o varios puntos (cada uno con sus propias especificaciones) así como el perfilamiento de las estrías, ¡todo en un mismo sistema!

      El sistema también incluye SPC, y utiliza un sistema de colección de datos para permitirle conectarse a medidores adicionales con el mismo software.

    • inROLL HR – Perfilador de alta resolución para chuck y carretilla

      El inRoll 9000/HR es un sistema perfilador laser de no-contacto el cual permite escanear el perfil de una carretilla, chuck y otro herramental. El perfil puede ser exportado a AutoCAD. El sistema puede comparer perfiles de carretillas nuevas o usadas, determina a que modelo pertenece el perfil en particular, encuentra diseños duplicados y compara el diagrama original con los escaneos de producción.

    • Symphony - measurement acquisition and Statistical Process Control

      Symphony is Quality By Vision's data collection and analysis software. The software can collect data from a variety of equipment, starting with Quality By Vision's own equipment, calipers, gauges, optical equipment and other tools.

      The data can be collected automatically, reviewed, reported, and analyzed via the free integrated SPC software. Reports and data can be imported and exported as necessary and the data can also be viewed remotely by a remote administrator or operator.

      Various online graphs can be generated, including an overview graph that can show you the live state of manufacturing throughout the company.

    • Beverage Buckle & Burst

      The Buckle and Burst Gauge for Beverage cans provides an accurate, safe and user-friendly method for testing dome reversal / buckle and burst pressure points for beverage cans and ends!

    • SEAM360 - Una vista del cierre de 360 grados – espesor & longitud (altura)

      Midiendo el espesor y la longitud del cierre en cada punto alrededor de la lata, se encuentra que muchos problemas internos son fácilmente localizados. El sistema utiliza tecnología láser de perfilamiento para procesar rápidamente una lata y las gráficas de su espesor y longitud del cierre en 360 grados.

      Analizando estas gráficas, problemas como arrugas, cierres abiertos e incluso falso cierre pueden ser detectados fácilmente.

      El sistema viene en una versión para laboratorio o en una versión robótica en línea.

    • ASIS - fully automatic seam inspection based on SEAMetal

      ASIS is the world's first fully automatic destructive double seam inspection system. The system does not use harmful, inaccurate or expensive X-ray systems - it uses a robotic arm which empties the can, cuts it, cleans it and performs the measurement with absolutely no human interference!

      Already in use in Coca Cola plants around the world for a few years, this system has proven as accurate and durable as it is cost effective!

    • Front End Gauge

      The Front End Gauge is a highly accurate automatic system, designed to measure the can wall thickness at two different points as well as the dome depth and trimmed can height.

    • SEAMetal MSD - semi automatic double seam projector - beverage

      SEAMetal semi-automatic is a low cost solution for customers requiring an accurate seam inspection system.

      This system offers most of the features of the full SEAMetal SD solution, but without the automatic detection module.

      • Double seam saws for beverage cans

        Beverage cans are quite difficult to cut accurately with minimal deformation of the seam. Quality By Vision has researched the subject for years - testing many different saw designs, cutting speeds, cutting angles, blade materials and blade shapes and designs. Our state of the art beverage can saws are reliable, quiet, durable and produce accurate and repeatable results with minimal deformation, almost no burring or scarring regardless of which operator is making the cut!

      • Gauges & attachments - beverage cans

        Quality By Vision produces gauges and calipers of any requirement for the beverage Quality Control laboratory.

      • SEAMetal HD - Statistical Process Control (SPC)

        SEAMetal HD's free SPC option is integrated right into the software, it is easy to use and learn. It provides powerful statistical analysis tools and allows operators and administrators alike to view and ensure quality is getting better, not worse...

        And of course, you can't beat the price!

    • SEAMetal SD - double seam examination for beverage can seams

      SEAMetal SD for beverage is a standard definition (640 x 480) system for examining and evaluating double seams for beverage cans. The software is identical to SEAMetal HD, but contains a less expensive lower resolution optical unit.

      The software comes with a free SPC statistical analysis and process control package!

      • Double seam saws for beverage cans

        Beverage cans are quite difficult to cut accurately with minimal deformation of the seam. Quality By Vision has researched the subject for years - testing many different saw designs, cutting speeds, cutting angles, blade materials and blade shapes and designs. Our state of the art beverage can saws are reliable, quiet, durable and produce accurate and repeatable results with minimal deformation, almost no burring or scarring regardless of which operator is making the cut!

      • Gauges & attachments - beverage cans

        Quality By Vision produces gauges and calipers of any requirement for the beverage Quality Control laboratory.

      • SEAMetal HD - Statistical Process Control (SPC)

        SEAMetal HD's free SPC option is integrated right into the software, it is easy to use and learn. It provides powerful statistical analysis tools and allows operators and administrators alike to view and ensure quality is getting better, not worse...

        And of course, you can't beat the price!

      • 21 CFR 11 compliance

        FDA's 21 CFR 11 is an important guideline today for ensuring data integrity, security and authentication

    • SEAMetal HD Beverage - double seam evaluation in high definition

      The SEAMetal HD high definition double seam scope for three piece and two piece beverage cans is one of our most popular products. The software is flexible and easy to learn, and includes many features specifically adapted for the beverage markets as well as custom optical units.

      The software includes a free SPC software as well as analysis and customization tools (e.g., customizing the reports) that are unique to SEAMetal.

      Join the hundreds of customers already using SEAMetal.

      • SEAMetal HD - Statistical Process Control (SPC)

        SEAMetal HD's free SPC option is integrated right into the software, it is easy to use and learn. It provides powerful statistical analysis tools and allows operators and administrators alike to view and ensure quality is getting better, not worse...

        And of course, you can't beat the price!

      • Double seam saws for beverage cans

        Beverage cans are quite difficult to cut accurately with minimal deformation of the seam. Quality By Vision has researched the subject for years - testing many different saw designs, cutting speeds, cutting angles, blade materials and blade shapes and designs. Our state of the art beverage can saws are reliable, quiet, durable and produce accurate and repeatable results with minimal deformation, almost no burring or scarring regardless of which operator is making the cut!

      • Gauges & attachments - beverage cans

        Quality By Vision produces gauges and calipers of any requirement for the beverage Quality Control laboratory.

      • 21 CFR 11 compliance

        FDA's 21 CFR 11 is an important guideline today for ensuring data integrity, security and authentication

      • SEAMetal HD Networking capabilities

    • Gauges & attachments - beverage cans

      Quality By Vision produces gauges and calipers of any requirement for the beverage Quality Control laboratory.

    • Double seam saws for beverage cans

      Beverage cans are quite difficult to cut accurately with minimal deformation of the seam. Quality By Vision has researched the subject for years - testing many different saw designs, cutting speeds, cutting angles, blade materials and blade shapes and designs. Our state of the art beverage can saws are reliable, quiet, durable and produce accurate and repeatable results with minimal deformation, almost no burring or scarring regardless of which operator is making the cut!

      • TBS-4BC Manual Beverage Saw

        Quality By Vision invested years of research in producing the best beverage saws on the market. The manual beverage saw is a simple solution which uses high speed carbide blades to produce a cut that has minimal deformation and operator influence every single cut!

      • TBS-A1C Automatic Beverage Twin Blade saw - 1 position

        The TBS-A1C twin blade saw automatically cuts the beverage can with minimal deformation and no operator influence on the cut quality or speed.

        The saw is safe, quiet and automatic for the best possible accuracy and repeatability even when there is more than one seam checker.

      • TBS-3AB Automatic Beverage saw - 3 positions

        Our 3 point beverage saw is high speed carbide saw capable of cutting the beverage can with minimal deformation during the cut and no operator influence on the position of the cut or the cut itself.

        Different operators can exert different forces on the cut - which can change measurement data. Quality By Vision's beverage saws use identical force, which after years of research, produce the cleanest and best cuts in the industry!

      • TBS-4PC Portable beverage Twin Blade Saw

        the portable beverage twin blade saw is a portable saw for use by technicians who prefer not to rely on the local filler's Q/A equipment. The saw is typically bundled with the portable version of our SEAMetal software.

  • Quality control systems for Aerosol cans

    Aerosol can fillers and can makers can utilize this equipment in their Quality Control lab.

    • SEAMetal 9000 SD - Standard definition seam test evaluation - Aerosol

      The aerosol edition of the SEAMetal software provides special features such as bottom countersink measurement and analysis tools for anyone filling or closing aerosol cans.

      The system comes with a free SPC statistical analysis and process control software and is very easy to learn.

      • TBS-4BC (Aerosol) Manual Aerosol saw

        The new Aerosol manual saw was designed to produce the best seam cut for aerosol cans, with minimal deformation, burring or other problems typically associated with other brands.

        The saw is both safe to use and operators haver very little influence on the quality of the cut seam - thus improving the overall GR&R rating.

      • SEAMetal HD - Statistical Process Control (SPC)

        SEAMetal HD's free SPC option is integrated right into the software, it is easy to use and learn. It provides powerful statistical analysis tools and allows operators and administrators alike to view and ensure quality is getting better, not worse...

        And of course, you can't beat the price!

      • 21 CFR 11 compliance

        FDA's 21 CFR 11 is an important guideline today for ensuring data integrity, security and authentication

    • Buckle & Burst - Aerosol pressure - dome reversal

      The buckle and burst system provides an accurate method for testing dome reversal and burst profiling for aerosol cans

    • Adaptive Seam Thickness gauge for Aerosol cans

      The adaptive seam thickness gauge finally introduced for aerosol cans by adapting automatically to the chuck wall angle. It is highly repeatable as it does not require the operator to excert any force.

    • Clearance Gauge – ajuste rápido y preciso de cerradora

      El Clearance Gauge le permitirá ajustar la maquina cerradora de forma fácil y rápida y así, mejorando la calidad de sus cierres. El sistema elimina las conjeturas durante el ajuste de la cerradora, mejora la calidad en su totalidad y reduce la cantidad y duración de los paros de las maquinas cerradoras y ayuda a encontrar el herramental dañado o desgastado antes de que se conviertan en un mayor problema.

    • Symphony - measurement acquisition and Statistical Process Control

      Symphony is Quality By Vision's data collection and analysis software. The software can collect data from a variety of equipment, starting with Quality By Vision's own equipment, calipers, gauges, optical equipment and other tools.

      The data can be collected automatically, reviewed, reported, and analyzed via the free integrated SPC software. Reports and data can be imported and exported as necessary and the data can also be viewed remotely by a remote administrator or operator.

      Various online graphs can be generated, including an overview graph that can show you the live state of manufacturing throughout the company.

  • Chemical coating analysis and coulometric testing

    Eletrochemical testing equipment for steel mills, fillers, customers, auto makers and other companies requiring coulometric tests of coating of tin, chrome, alloys or enamel in their Q/C laboratories.

    • STANNOMetal 9000 - coulometric tin coating thickness tester

      STANNOMetal is the only dedicated system for measuring tin coating weight on ferrum (steel) samples. The system uses the coulometric method (ASTM ref. method B) and utilizes accurate testing and sampling along with new software to accurately detect and analyze how much tin and alloy are on the measured samples.

      Available in various configurations - either using 1 sq. Inch samples or 4 sq. Inch samples (large) and in one cell, three cell or three cell on rails, as well as automatic or manual.

    • CHROMetal 9000 - Chrome (Cr) coating analysis

      Chrome coating measurement using the coulometric method. Also known as STANNOMATIC or CHROMATIC system.

      Available in various configurations - either using 1 sq. Inch samples or 4 sq. Inch samples (large) and in one cell, three cell or three cell on rails, as well as automatic or manual.

    • Enamel Rater II

      The Enamel Rater II is one of the world's most popular enamel rater designs.

      Now available from Quality By Vision!

  • Plastic measurement systems

    Measurements of layer thicknesses in high resolution for multilayered plastics - offline Quality control equipment.

    • Polysee 9000 - Multilayer Plastics Analyzer

      The Polysee meaurement system uses optical transmissive, ultraviolet and reflective light to differenciate and measure the different layers within plastic.

      Some plastic are too expensive to waste layer thickness on. This unit can save wasted material which can accumulate into hunderds of thousands of dollars per year!

    • Polysee HD - High-definition Multilayer Plastics Analyzer

      The Polysee meaurement system uses optical transmissive, ultraviolet and reflective light to differenciate and measure the different layers within plastic.

      Some plastic are too expensive to waste layer thickness on. This unit can save wasted material which can accumulate into hunderds of thousands of dollars per year!

  • PET & Bottles

    PET and Bottles inspection equipment

    • Empty PET Bottles: Rotary Whole Surface Inspection system

      A fully automated, multipoint system for inspecting whole surface for empty PET bottles. The system is installed on the line and utilizes multiple cameras to locate defects at high speeds.

    • PET Blow Molding Insert Inspection System

      This system is installed inside existing SBO machines, so no additional external system is necessary. Inside SBO model 10, it will measure TSS and bottom. for SBO model 16, it will measure TSS, bottom and sidewall of PET molding inserts.

    • Preform: Rotary whole surface inspection system

      P&S 21RWP is a high speed rotary inspection machine with 4 wheels. The system detects faults including: external substances, reform, and production during the preform production of PET bottles.

    • Empty glass bottles: Rotary whole surface Inspection system

      P&S 21RG is a reliable and accurate rotary inspection system, which automatically inspects damage, flaws, external substances (bottom and sidewall of bottle), and uncleanness in an empty bottle.

    • Glass bottles: crack inspection

      This unit utilizes a single wheel architecture to process glass bottles and search for signs of cracks in various locations.

      This low cost unit provides several crack detection systems at a high rate (250BPM) and offers quite a few optional measurements to complement this detection.

    • Cap Inspection System

      The Cap Inspection system is a high tech unit for detecting no cap, cocked cap, tear in skirt, tear in bridge, vertical crack, no skirt and fill level after the capping machine on the conveyor system.

  • Other measurement systems

    Quality Control, SPC software and data aquisition software and hardware for various types of systems.

    • CapSee 9000 - Ensures the closure of medicinal Aluminum aerosol capsules

      The CapSee system is a destructive measurement system for aluminum aerosol capsules often used for the treatment of respitory illnesses such as SARS or ASTHMA.

      The system uses optics, laser and mechanics to accurately measure the critical parameters for these aerosol capsules.

      • CapSee 9000 - Aluminum capsule saw

        The CapSee system is a destructive measurement system for aluminum aerosol capsules often used for the treatment of respitory illnesses such as SARS or ASTHMA.

        This saw is used to prepare the samples for testing.

    • TBS-4MG General line Saw

      The general line saw is a unique saw for cutting into general line cans and containers in order to view their seams with the SEAMetal double seam scope.

    • Symphony - measurement acquisition and Statistical Process Control

      Symphony is Quality By Vision's data collection and analysis software. The software can collect data from a variety of equipment, starting with Quality By Vision's own equipment, calipers, gauges, optical equipment and other tools.

      The data can be collected automatically, reviewed, reported, and analyzed via the free integrated SPC software. Reports and data can be imported and exported as necessary and the data can also be viewed remotely by a remote administrator or operator.

      Various online graphs can be generated, including an overview graph that can show you the live state of manufacturing throughout the company.

PRODUCTOS

  • Sistemas de control de calidad para latas de alimentos

    Sistemas de control de calidad para latas de alimentos – empacadores y fabricantes de latas pueden usar estos productos en sus laboratorios de control de calidad.

    • Clearance Gauge – ajuste rápido y preciso de cerradora

      El Clearance Gauge le permitirá ajustar la maquina cerradora de forma fácil y rápida y así, mejorando la calidad de sus cierres. El sistema elimina las conjeturas durante el ajuste de la cerradora, mejora la calidad en su totalidad y reduce la cantidad y duración de los paros de las maquinas cerradoras y ayuda a encontrar el herramental dañado o desgastado antes de que se conviertan en un mayor problema.

    • CPA – Analizador de Perfil de lata

      Hay algunas soluciones de medidores de contorno o perfiloscopios en el mercado. Nosotros estamos orgullosos de  tener uno de los más precisos medidores láser sin contacto en el mercado. Este sistema detecta automáticamente muchos parámetros de cada rizo a lo largo del perfil de la lata. La medición tarda no más de 8 segundos para la lata más alta,  también incluye la altura de la lata y además medición del ancho de la pestaña.

      Los medidores de contacto pueden ya sea arañar, romper, o proveer de una medida ligeramente imprecisa debido a la forma de la punta de contacto. Un sistema de láser óptico  y sin contacto es una solución de mucha mayor calidad.

    • EPA - End Profile Analyzer

      El amigable End Profile Analyzer mide todos los parámetros internos y externos de una tapa sanitaria ( o fondo), El sistema utiliza una mezcla de mecanismos mecánicos y ópticos para proveer al operador de todas las mediciones necesarias.

    • inROLL HR – Perfilador de alta resolución para chuck y carretilla

      El inRoll 9000/HR es un sistema perfilador laser de no-contacto el cual permite escanear el perfil de una carretilla, chuck y otro herramental. El perfil puede ser exportado a AutoCAD. El sistema puede comparer perfiles de carretillas nuevas o usadas, determina a que modelo pertenece el perfil en particular, encuentra diseños duplicados y compara el diagrama original con los escaneos de producción.

    • Medidor de Precorte Residual

      El medidor Score es un sistema amigable y de bajo costo para la medición el residual y la forma de las estrías.

      El sistema utiliza mediciones de campo profundo, junto con tecnología láser PerfectFocusTM para asegurar que si que sus mediciones están en su lugar. El sistema permite medir uno o varios puntos (cada uno con sus propias especificaciones) así como el perfilamiento de las estrías, ¡todo en un mismo sistema!

      El sistema también incluye SPC, y utiliza un sistema de colección de datos para permitirle conectarse a medidores adicionales con el mismo software.

    • BTE-100 - Buckle Tester for Seamed Ends

      The BTE-100 - Buckle Tester for Seamed Ends is an automatic, easy to use pressure tester for three-piece seamed cans. The system includes a computer with software that automatically detects the pressure points and displays the can deformation at each stage.

    • Symphony - measurement acquisition and Statistical Process Control

      Symphony is Quality By Vision's data collection and analysis software. The software can collect data from a variety of equipment, starting with Quality By Vision's own equipment, calipers, gauges, optical equipment and other tools.

      The data can be collected automatically, reviewed, reported, and analyzed via the free integrated SPC software. Reports and data can be imported and exported as necessary and the data can also be viewed remotely by a remote administrator or operator.

      Various online graphs can be generated, including an overview graph that can show you the live state of manufacturing throughout the company.

    • Welding Analyzer - ensure your welds are spot on!

      In order to ensure your Welding will hold, a welding analysis is critical. The Quality By Vision Welding Analyzer is a simple to learn system that measures Nuggets and Extrusions easily and accurately.

      Our unique lighting system allows both Nugget and Extrusion to be easily visible and measure them.

    • Body Blank Gauge

      High accuracy, repeatable gauge for measuring body blank Length, Width and Angle (squareness).

      The unit can be used either as standalone, or connected to Symphony SPC data collection software or other software compatible with RS232 data collection.

    • Seam Stripper for Food Cans

      The Seam Stripper for Food Cans can remove the coverhook from any size food can safely, quickly and without distorting the wrinkle, all with just one set of blades. This dramatically reduces the cost and complexity of the machine. There are no extra cutting heads to buy and maintain and it takes just seconds to switch from one can size to another.

    • SEAMetal 9000 SD - definición estándar en medición de cierre- alimentos

      SEAMetal es uno de las herramientas de análisis y visualización de cierre más ampliamente usadas en el mundo. Con cientos de clientes alrededor del mundo, el software y hardware se está progresando continuamente.

      SEAMetal es el sistema de medición de doble cierre que cualquiera puede aprender y usar fácilmente en su propio leguaje nativo.

      • Food saws

        Quality By Vision has a wide range of double seam sectioning saws ("bread saw") for food cans. Accurate cuts are an important part of the seam inspection process - bad cuts can have burrs or deform the seam so that the measurement will simply not be accurate. A proper saw should cause minimal deformation, operator should have the smallest amount of influence on the cut and the cuts should have no burrs or visible scarring!

      • Gauges and attachments for food cans

        Gauges and calipers for quality control for food cans are quite important. Quality By Vision offers high quality gauges of all types, all can be easily integrated automatically into our software.

      • SEAMetal HD - Statistical Process Control (SPC)

        SEAMetal HD's free SPC option is integrated right into the software, it is easy to use and learn. It provides powerful statistical analysis tools and allows operators and administrators alike to view and ensure quality is getting better, not worse...

        And of course, you can't beat the price!

      • 21 CFR 11 compliance

        FDA's 21 CFR 11 is an important guideline today for ensuring data integrity, security and authentication

    • SEAMetal HD - Visualizador de doble cierre de alta definición

      SEAMetal HD es la versión más reciente de los ámbitos doble costura por la Calidad por la visión. Esta última versión introduce ahora una de alta definición (HDTV) para ver de la costura.

      Esto proporciona la mayor precisión y resolución de cualquier sistema de inspección de la costura jamás realizada por la Calidad por la visión. Esta última edición se une a la familia de productos SEAMetal, ya utilizado por cientos de compañías en todo el mundo.

      • Gauges and attachments for food cans

        Gauges and calipers for quality control for food cans are quite important. Quality By Vision offers high quality gauges of all types, all can be easily integrated automatically into our software.

      • Food saws

        Quality By Vision has a wide range of double seam sectioning saws ("bread saw") for food cans. Accurate cuts are an important part of the seam inspection process - bad cuts can have burrs or deform the seam so that the measurement will simply not be accurate. A proper saw should cause minimal deformation, operator should have the smallest amount of influence on the cut and the cuts should have no burrs or visible scarring!

      • SEAMetal HD - Statistical Process Control (SPC)

        SEAMetal HD's free SPC option is integrated right into the software, it is easy to use and learn. It provides powerful statistical analysis tools and allows operators and administrators alike to view and ensure quality is getting better, not worse...

        And of course, you can't beat the price!

      • 21 CFR 11 compliance

        FDA's 21 CFR 11 is an important guideline today for ensuring data integrity, security and authentication

      • SEAMetal HD Networking capabilities

    • SEAMetal 9000 MSD - semi automatic double seam analyzer - food

      SEAMetal semi-automatic is a low cost solution for customers requiring an accurate seam inspection system.

      This system offers most of the features of the full SEAMetal SD solution, but without the automatic detection module.

      • Food saws

        Quality By Vision has a wide range of double seam sectioning saws ("bread saw") for food cans. Accurate cuts are an important part of the seam inspection process - bad cuts can have burrs or deform the seam so that the measurement will simply not be accurate. A proper saw should cause minimal deformation, operator should have the smallest amount of influence on the cut and the cuts should have no burrs or visible scarring!

      • Gauges and attachments for food cans

        Gauges and calipers for quality control for food cans are quite important. Quality By Vision offers high quality gauges of all types, all can be easily integrated automatically into our software.

      • SEAMetal HD - Statistical Process Control (SPC)

        SEAMetal HD's free SPC option is integrated right into the software, it is easy to use and learn. It provides powerful statistical analysis tools and allows operators and administrators alike to view and ensure quality is getting better, not worse...

        And of course, you can't beat the price!

    • Gauges and attachments for food cans

      Gauges and calipers for quality control for food cans are quite important. Quality By Vision offers high quality gauges of all types, all can be easily integrated automatically into our software.

    • Food saws

      Quality By Vision has a wide range of double seam sectioning saws ("bread saw") for food cans. Accurate cuts are an important part of the seam inspection process - bad cuts can have burrs or deform the seam so that the measurement will simply not be accurate. A proper saw should cause minimal deformation, operator should have the smallest amount of influence on the cut and the cuts should have no burrs or visible scarring!

      • TBS-4A Automatic food Twin Blade Saw

        An automatic saw is no longer just a luxary few companies can afford. In order to accurately measure a can, or rely on SPC statistics, an identical cut must be produced regardless of which operator had made it.

        The stainless steel automatic saw not only prevents the operator from influencing the cut, but also ensures that the operator does not deform the seam during the cutting process.

      • TBS-4M Manual food can twin blade saw

        The manual food can stainless steel saw is our classic design and uses a stainless steel design to ensure it remains working for many years.

        This low cost solution is one of our best selling twin blade saw designs.

      • TBS-4PF Portable Twin Blade Saw

        The portable twin blade food can saw provides an easy way for technicians to move from one factory to another without relying on local saws for seam inspection.

        The saw is intended to be bundled with a portable version of our best selling SEAMetal system.

      • TBS-SM - low budget Manual food saw

        The "simple" food saw is a low cost solution for companies requiring a simple and inexpensive solution for cutting the seams for double seam inspection.

        Quality By Vision realizes not everyone needs a high end, high cost, saw and has provided this for those customers that need a lower cost solution. This saw is typically bundled with the SEAMetal MSD system.

  • Quality Control systems for Beverage cans

    Beverage can Quality Control test systems - double seam inspection, can seam stripper, and more. Beverage can fillers can utilize these systems for the Q/C laboratory.

    • Clearance Gauge – ajuste rápido y preciso de cerradora

      El Clearance Gauge le permitirá ajustar la maquina cerradora de forma fácil y rápida y así, mejorando la calidad de sus cierres. El sistema elimina las conjeturas durante el ajuste de la cerradora, mejora la calidad en su totalidad y reduce la cantidad y duración de los paros de las maquinas cerradoras y ayuda a encontrar el herramental dañado o desgastado antes de que se conviertan en un mayor problema.

      • Cerradoras - Problemas y Soluciones

        Problemas y dificultades comunes con las cerradoras.

        Que problemas potenciales existen, ¿cómo encontrar estas dificultades y cómo se arreglan?

    • Medidor de Precorte Residual

      El medidor Score es un sistema amigable y de bajo costo para la medición el residual y la forma de las estrías.

      El sistema utiliza mediciones de campo profundo, junto con tecnología láser PerfectFocusTM para asegurar que si que sus mediciones están en su lugar. El sistema permite medir uno o varios puntos (cada uno con sus propias especificaciones) así como el perfilamiento de las estrías, ¡todo en un mismo sistema!

      El sistema también incluye SPC, y utiliza un sistema de colección de datos para permitirle conectarse a medidores adicionales con el mismo software.

    • inROLL HR – Perfilador de alta resolución para chuck y carretilla

      El inRoll 9000/HR es un sistema perfilador laser de no-contacto el cual permite escanear el perfil de una carretilla, chuck y otro herramental. El perfil puede ser exportado a AutoCAD. El sistema puede comparer perfiles de carretillas nuevas o usadas, determina a que modelo pertenece el perfil en particular, encuentra diseños duplicados y compara el diagrama original con los escaneos de producción.

    • Symphony - measurement acquisition and Statistical Process Control

      Symphony is Quality By Vision's data collection and analysis software. The software can collect data from a variety of equipment, starting with Quality By Vision's own equipment, calipers, gauges, optical equipment and other tools.

      The data can be collected automatically, reviewed, reported, and analyzed via the free integrated SPC software. Reports and data can be imported and exported as necessary and the data can also be viewed remotely by a remote administrator or operator.

      Various online graphs can be generated, including an overview graph that can show you the live state of manufacturing throughout the company.

    • Beverage Buckle & Burst

      The Buckle and Burst Gauge for Beverage cans provides an accurate, safe and user-friendly method for testing dome reversal / buckle and burst pressure points for beverage cans and ends!

    • SEAM360 - Una vista del cierre de 360 grados – espesor & longitud (altura)

      Midiendo el espesor y la longitud del cierre en cada punto alrededor de la lata, se encuentra que muchos problemas internos son fácilmente localizados. El sistema utiliza tecnología láser de perfilamiento para procesar rápidamente una lata y las gráficas de su espesor y longitud del cierre en 360 grados.

      Analizando estas gráficas, problemas como arrugas, cierres abiertos e incluso falso cierre pueden ser detectados fácilmente.

      El sistema viene en una versión para laboratorio o en una versión robótica en línea.

    • ASIS - fully automatic seam inspection based on SEAMetal

      ASIS is the world's first fully automatic destructive double seam inspection system. The system does not use harmful, inaccurate or expensive X-ray systems - it uses a robotic arm which empties the can, cuts it, cleans it and performs the measurement with absolutely no human interference!

      Already in use in Coca Cola plants around the world for a few years, this system has proven as accurate and durable as it is cost effective!

    • Front End Gauge

      The Front End Gauge is a highly accurate automatic system, designed to measure the can wall thickness at two different points as well as the dome depth and trimmed can height.

    • SEAMetal MSD - semi automatic double seam projector - beverage

      SEAMetal semi-automatic is a low cost solution for customers requiring an accurate seam inspection system.

      This system offers most of the features of the full SEAMetal SD solution, but without the automatic detection module.

      • Double seam saws for beverage cans

        Beverage cans are quite difficult to cut accurately with minimal deformation of the seam. Quality By Vision has researched the subject for years - testing many different saw designs, cutting speeds, cutting angles, blade materials and blade shapes and designs. Our state of the art beverage can saws are reliable, quiet, durable and produce accurate and repeatable results with minimal deformation, almost no burring or scarring regardless of which operator is making the cut!

      • Gauges & attachments - beverage cans

        Quality By Vision produces gauges and calipers of any requirement for the beverage Quality Control laboratory.

      • SEAMetal HD - Statistical Process Control (SPC)

        SEAMetal HD's free SPC option is integrated right into the software, it is easy to use and learn. It provides powerful statistical analysis tools and allows operators and administrators alike to view and ensure quality is getting better, not worse...

        And of course, you can't beat the price!

    • SEAMetal SD - double seam examination for beverage can seams

      SEAMetal SD for beverage is a standard definition (640 x 480) system for examining and evaluating double seams for beverage cans. The software is identical to SEAMetal HD, but contains a less expensive lower resolution optical unit.

      The software comes with a free SPC statistical analysis and process control package!

      • Double seam saws for beverage cans

        Beverage cans are quite difficult to cut accurately with minimal deformation of the seam. Quality By Vision has researched the subject for years - testing many different saw designs, cutting speeds, cutting angles, blade materials and blade shapes and designs. Our state of the art beverage can saws are reliable, quiet, durable and produce accurate and repeatable results with minimal deformation, almost no burring or scarring regardless of which operator is making the cut!

      • Gauges & attachments - beverage cans

        Quality By Vision produces gauges and calipers of any requirement for the beverage Quality Control laboratory.

      • SEAMetal HD - Statistical Process Control (SPC)

        SEAMetal HD's free SPC option is integrated right into the software, it is easy to use and learn. It provides powerful statistical analysis tools and allows operators and administrators alike to view and ensure quality is getting better, not worse...

        And of course, you can't beat the price!

      • 21 CFR 11 compliance

        FDA's 21 CFR 11 is an important guideline today for ensuring data integrity, security and authentication

    • SEAMetal HD Beverage - double seam evaluation in high definition

      The SEAMetal HD high definition double seam scope for three piece and two piece beverage cans is one of our most popular products. The software is flexible and easy to learn, and includes many features specifically adapted for the beverage markets as well as custom optical units.

      The software includes a free SPC software as well as analysis and customization tools (e.g., customizing the reports) that are unique to SEAMetal.

      Join the hundreds of customers already using SEAMetal.

      • SEAMetal HD - Statistical Process Control (SPC)

        SEAMetal HD's free SPC option is integrated right into the software, it is easy to use and learn. It provides powerful statistical analysis tools and allows operators and administrators alike to view and ensure quality is getting better, not worse...

        And of course, you can't beat the price!

      • Double seam saws for beverage cans

        Beverage cans are quite difficult to cut accurately with minimal deformation of the seam. Quality By Vision has researched the subject for years - testing many different saw designs, cutting speeds, cutting angles, blade materials and blade shapes and designs. Our state of the art beverage can saws are reliable, quiet, durable and produce accurate and repeatable results with minimal deformation, almost no burring or scarring regardless of which operator is making the cut!

      • Gauges & attachments - beverage cans

        Quality By Vision produces gauges and calipers of any requirement for the beverage Quality Control laboratory.

      • 21 CFR 11 compliance

        FDA's 21 CFR 11 is an important guideline today for ensuring data integrity, security and authentication

      • SEAMetal HD Networking capabilities

    • Gauges & attachments - beverage cans

      Quality By Vision produces gauges and calipers of any requirement for the beverage Quality Control laboratory.

    • Double seam saws for beverage cans

      Beverage cans are quite difficult to cut accurately with minimal deformation of the seam. Quality By Vision has researched the subject for years - testing many different saw designs, cutting speeds, cutting angles, blade materials and blade shapes and designs. Our state of the art beverage can saws are reliable, quiet, durable and produce accurate and repeatable results with minimal deformation, almost no burring or scarring regardless of which operator is making the cut!

      • TBS-4BC Manual Beverage Saw

        Quality By Vision invested years of research in producing the best beverage saws on the market. The manual beverage saw is a simple solution which uses high speed carbide blades to produce a cut that has minimal deformation and operator influence every single cut!

      • TBS-A1C Automatic Beverage Twin Blade saw - 1 position

        The TBS-A1C twin blade saw automatically cuts the beverage can with minimal deformation and no operator influence on the cut quality or speed.

        The saw is safe, quiet and automatic for the best possible accuracy and repeatability even when there is more than one seam checker.

      • TBS-3AB Automatic Beverage saw - 3 positions

        Our 3 point beverage saw is high speed carbide saw capable of cutting the beverage can with minimal deformation during the cut and no operator influence on the position of the cut or the cut itself.

        Different operators can exert different forces on the cut - which can change measurement data. Quality By Vision's beverage saws use identical force, which after years of research, produce the cleanest and best cuts in the industry!

      • TBS-4PC Portable beverage Twin Blade Saw

        the portable beverage twin blade saw is a portable saw for use by technicians who prefer not to rely on the local filler's Q/A equipment. The saw is typically bundled with the portable version of our SEAMetal software.

  • Quality control systems for Aerosol cans

    Aerosol can fillers and can makers can utilize this equipment in their Quality Control lab.

    • SEAMetal 9000 SD - Standard definition seam test evaluation - Aerosol

      The aerosol edition of the SEAMetal software provides special features such as bottom countersink measurement and analysis tools for anyone filling or closing aerosol cans.

      The system comes with a free SPC statistical analysis and process control software and is very easy to learn.

      • TBS-4BC (Aerosol) Manual Aerosol saw

        The new Aerosol manual saw was designed to produce the best seam cut for aerosol cans, with minimal deformation, burring or other problems typically associated with other brands.

        The saw is both safe to use and operators haver very little influence on the quality of the cut seam - thus improving the overall GR&R rating.

      • SEAMetal HD - Statistical Process Control (SPC)

        SEAMetal HD's free SPC option is integrated right into the software, it is easy to use and learn. It provides powerful statistical analysis tools and allows operators and administrators alike to view and ensure quality is getting better, not worse...

        And of course, you can't beat the price!

      • 21 CFR 11 compliance

        FDA's 21 CFR 11 is an important guideline today for ensuring data integrity, security and authentication

    • Buckle & Burst - Aerosol pressure - dome reversal

      The buckle and burst system provides an accurate method for testing dome reversal and burst profiling for aerosol cans

    • Adaptive Seam Thickness gauge for Aerosol cans

      The adaptive seam thickness gauge finally introduced for aerosol cans by adapting automatically to the chuck wall angle. It is highly repeatable as it does not require the operator to excert any force.

    • Clearance Gauge – ajuste rápido y preciso de cerradora

      El Clearance Gauge le permitirá ajustar la maquina cerradora de forma fácil y rápida y así, mejorando la calidad de sus cierres. El sistema elimina las conjeturas durante el ajuste de la cerradora, mejora la calidad en su totalidad y reduce la cantidad y duración de los paros de las maquinas cerradoras y ayuda a encontrar el herramental dañado o desgastado antes de que se conviertan en un mayor problema.

    • Symphony - measurement acquisition and Statistical Process Control

      Symphony is Quality By Vision's data collection and analysis software. The software can collect data from a variety of equipment, starting with Quality By Vision's own equipment, calipers, gauges, optical equipment and other tools.

      The data can be collected automatically, reviewed, reported, and analyzed via the free integrated SPC software. Reports and data can be imported and exported as necessary and the data can also be viewed remotely by a remote administrator or operator.

      Various online graphs can be generated, including an overview graph that can show you the live state of manufacturing throughout the company.

  • Chemical coating analysis and coulometric testing

    Eletrochemical testing equipment for steel mills, fillers, customers, auto makers and other companies requiring coulometric tests of coating of tin, chrome, alloys or enamel in their Q/C laboratories.

    • STANNOMetal 9000 - coulometric tin coating thickness tester

      STANNOMetal is the only dedicated system for measuring tin coating weight on ferrum (steel) samples. The system uses the coulometric method (ASTM ref. method B) and utilizes accurate testing and sampling along with new software to accurately detect and analyze how much tin and alloy are on the measured samples.

      Available in various configurations - either using 1 sq. Inch samples or 4 sq. Inch samples (large) and in one cell, three cell or three cell on rails, as well as automatic or manual.

    • CHROMetal 9000 - Chrome (Cr) coating analysis

      Chrome coating measurement using the coulometric method. Also known as STANNOMATIC or CHROMATIC system.

      Available in various configurations - either using 1 sq. Inch samples or 4 sq. Inch samples (large) and in one cell, three cell or three cell on rails, as well as automatic or manual.

    • Enamel Rater II

      The Enamel Rater II is one of the world's most popular enamel rater designs.

      Now available from Quality By Vision!

  • Plastic measurement systems

    Measurements of layer thicknesses in high resolution for multilayered plastics - offline Quality control equipment.

    • Polysee 9000 - Multilayer Plastics Analyzer

      The Polysee meaurement system uses optical transmissive, ultraviolet and reflective light to differenciate and measure the different layers within plastic.

      Some plastic are too expensive to waste layer thickness on. This unit can save wasted material which can accumulate into hunderds of thousands of dollars per year!

    • Polysee HD - High-definition Multilayer Plastics Analyzer

      The Polysee meaurement system uses optical transmissive, ultraviolet and reflective light to differenciate and measure the different layers within plastic.

      Some plastic are too expensive to waste layer thickness on. This unit can save wasted material which can accumulate into hunderds of thousands of dollars per year!

  • PET & Bottles

    PET and Bottles inspection equipment

    • Empty PET Bottles: Rotary Whole Surface Inspection system

      A fully automated, multipoint system for inspecting whole surface for empty PET bottles. The system is installed on the line and utilizes multiple cameras to locate defects at high speeds.

    • PET Blow Molding Insert Inspection System

      This system is installed inside existing SBO machines, so no additional external system is necessary. Inside SBO model 10, it will measure TSS and bottom. for SBO model 16, it will measure TSS, bottom and sidewall of PET molding inserts.

    • Preform: Rotary whole surface inspection system

      P&S 21RWP is a high speed rotary inspection machine with 4 wheels. The system detects faults including: external substances, reform, and production during the preform production of PET bottles.

    • Empty glass bottles: Rotary whole surface Inspection system

      P&S 21RG is a reliable and accurate rotary inspection system, which automatically inspects damage, flaws, external substances (bottom and sidewall of bottle), and uncleanness in an empty bottle.

    • Glass bottles: crack inspection

      This unit utilizes a single wheel architecture to process glass bottles and search for signs of cracks in various locations.

      This low cost unit provides several crack detection systems at a high rate (250BPM) and offers quite a few optional measurements to complement this detection.

    • Cap Inspection System

      The Cap Inspection system is a high tech unit for detecting no cap, cocked cap, tear in skirt, tear in bridge, vertical crack, no skirt and fill level after the capping machine on the conveyor system.

  • Other measurement systems

    Quality Control, SPC software and data aquisition software and hardware for various types of systems.

    • CapSee 9000 - Ensures the closure of medicinal Aluminum aerosol capsules

      The CapSee system is a destructive measurement system for aluminum aerosol capsules often used for the treatment of respitory illnesses such as SARS or ASTHMA.

      The system uses optics, laser and mechanics to accurately measure the critical parameters for these aerosol capsules.

      • CapSee 9000 - Aluminum capsule saw

        The CapSee system is a destructive measurement system for aluminum aerosol capsules often used for the treatment of respitory illnesses such as SARS or ASTHMA.

        This saw is used to prepare the samples for testing.

    • TBS-4MG General line Saw

      The general line saw is a unique saw for cutting into general line cans and containers in order to view their seams with the SEAMetal double seam scope.

    • Symphony - measurement acquisition and Statistical Process Control

      Symphony is Quality By Vision's data collection and analysis software. The software can collect data from a variety of equipment, starting with Quality By Vision's own equipment, calipers, gauges, optical equipment and other tools.

      The data can be collected automatically, reviewed, reported, and analyzed via the free integrated SPC software. Reports and data can be imported and exported as necessary and the data can also be viewed remotely by a remote administrator or operator.

      Various online graphs can be generated, including an overview graph that can show you the live state of manufacturing throughout the company.

All rights reserved, Quality By Vision - information subject to change without prior notice