The QVIS-C1 system is a high-speed machine vision system for 100% inspection of cans. The system uses a single, high-resolution color…
Food
QVIS-E1: 100% Vision Inspection, Can Ends and Shells
The QVIS-E1 system is a user-friendly machine vision system for 100% inspection of can ends. The system uses a single,…
SEAMetal HD: Double Seam Inspection for Food Cans
NEW! SEAMetal 6.0 Version for Windows 10 Many companies believe that increasing the number of double seam measurements is the…
SEAMetal XD: Double Seam Gauge software
NEW SEAMETAL 6.0 version for Windows 10 SEAMetal XD is the latest generation of our benchmark SEAMetal double seam inspection…
Clearance Gauge: Double Seamer Setup and Adjustment System
Imagine a tool that takes the guesswork out of seamer setup, improves seam integrity and consistency, increases uptime and makes changeovers…
SEAM360: Non Destructive Seam Inspection for Food Cans
The SEAM360 is the ultimate machine vision double seam can inspection gauge. The system is used for both three piece…
Score Residual Gauge
Quality By Vision’s Score Residual Gauge is an inexpensive, accurate and feature-rich gauging solution for any type of Easy Open end. …
LDDS-200: 100% Lacquer Inspection for Sheets and Blanks
LDDS-200 is able to scan and analyze a complete lacquered sheet (at the coating line) or blanks (before welding), including…
CPA: Can Bead Profile, Height and Flanges, Food Cans
Our Can Profile Analyzer is the first and only one of its kind to use laser profiling technologies for a…
EPA
The EPA – End Profile Analyzer is an all-in-one can end measurement system, which uses a combination of laser profiling…
ALT-100 Axial Load Crush
The ALT-100 is Quality By Vision’s latest Axial Load (Crush) Tester for can makers. The ALT-100 quickly, safely and accurately…
RLT-100: Radial Load Paneling
The RLT-100 Radial Load (Panel) Tester automatically and safely tests a can’s resistance to radial load (implosion pressure). We designed…
BTE-100: buckle tester, Food Ends
Quality By Vision’s BTE-100 – Buckle Tester for Seamed Ends is an automatic, easy to use pressure tester for three-piece…
BEO-100: Pressure, Easy Open Ends
Quality By Vision’s BEO-100 – Buckle Tester for Easy Open Ends is an automatic, safe and easy to use pressure…
Pop & Tear Gauge
Quality By Vision’s Pop and Tear Gauge is a high accuracy, programmable and automatic system for measuring the force needed…
Body Blank Gauge
Quality By Vision’s Body Blank Gauge is a high accuracy, high repeatability gauge for measuring Body Blank length, width and angle…
Welding Analyzer
Many companies today are welding food cans using a welding system such as the Sudronic copper wire system. However, not all companies…
inROLL HR: Tooling Profile Scanner
Worn or incorrect roll and chuck profiles can lead to bad double seams, machinery breakdowns, product holds and customer complaints.…
SEAMetal SD: Double Seam inspection, Food Cans
NEW SEAMETAL 6.0 for Windows 10 Using the same software as the acclaimed SEAMetal HD for double seam measurements, the SEAMetal SD…
SEAMetal Portable
NEW SEAMETAL 6.0 for Windows 10 All benefits SEAMetal have to offer but in a portable unit. The latest version of…
Enamel Rater II
The Enamel Rater II instrument tests the coverage of the enamel coating inside food and beverage cans. It displays an…
BDG-100: Manual Bead Depth Gauge, Food Cans
Quality By Vision’s new Bead Depth Gauge is an accurate, user friendly digital gauge that can measure bead depth on…
Seam Stripper: Food Cans
One of the most important parameters of the finished seam is the Wrinkle / Tightness rating. All 3-piece can makers…
TBS-4A: Automatic Saw, Food cans
The TBS-4A – is our most popular automatic saw for food cans, used to cut the double seam for destructive…
NRC – Noise Reducer, Food Can Saw
The SEAMetal saws utilize a special technique which yields a perfect cut every time for identical and perfect double seams.…
TBS-4M: manual saw, Food Cans
The TBS-4M is a manual saw for food cans destructive double seam inspection: Easy to pull lever. Primarily for steel…
TBS-SM: manual double blade saw, Food Cans
The TBS-SM saw was designed as a simple and low cost can seam cutting solution for a wide variety of…
TBS-4PF: portable twin blade saw
The TBS-4PF is intended for double seam inspection on the go: Quick manual operation. Cuts double seams easily with little…
Flange width gauge: Food Cans
Measuring the flange width is one of the most important parameters for a perfect seam. Quality By Vision’s can flange…
Countersink Gauge: Food Cans
The Countersink Gauge for Food Cans provides a quick and accurate way for operators to mechanically measure countersink on food…
Seam Thickness Gauge: Food Cans
The original revolutionary Adaptive Can Seam Thickness Gauge for Food Cans from Quality By Vision. Why buy a knock off…
Seam Height, Bodyhook and Coverhook Gauges
NEW! The world’s first combination tabletop gauge for Seam height / length, bodyhook and coverhook from Quality By Vision. The…
Can Body Plug Diameter Gauges
Quality By Vision’s Can Body Plug Diameter Gauge is an accurate, robust tabletop gauge that measures inside diameter (ID) on…
Motorized Can height gauge: Food Cans
Can height measurements are one of the most important parameters to measure on a can. Incorrect can height can indicate many issues with…
STANNOMetal 9000: Tin Coating on steel thickness
Quality By Vision is the exclusive manufacturer of the STANNOMATIC method of measuring Tin Coating thickness and Chrome Coating thickness.…
CHROMetal 9000 – Chrome (Cr) coating analysis
CHROMetal utilizes the same technology as STANNOMetal in order to accurately measure chrome plating thickness under the WindowsTM operating system.…
Symphony: SPC and gauge data acquisition
This easy to use and feature rich software provides real time monitoring, data collection and statistical process control. This allows plants to easily view,…